P4SMBJ Datasheet, PDF (1/2 Pages) CHENG-YI ELECTRONIC CO., LTD. – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

P4SMBJ SERIES
SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
CHENG- YI
ELECTRONIC
VOLTAGE 5.0 to 170 VOLTS
400 WATT PEAK POWER PULSE
DO-214AA
MODIFIED J-BEND
FEATURES
For surface mounted applications in order to
optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
Excellent clamping capability
Repetition Rate (duty cycle):0.01%
Fast response time: typically less then 1.0 ps
from 0 volts to BV for bidirrctional types
Typical ID less then 1 A above 10V
High tempreature soldering:250⁰C/10 seconds
at terminals
Plastic package has Underwrites Laboratory
Flammability Classification 94V-O
.077(1.96)
.083(2.11)
.130(3.30)
.155(3.94)
.084(2.13)
.096(2.44)
.030(0.76)
.060(1.27)
.160(4.06)
.180(4.57)
.006(.152)
.012(.305)
.004(.102)
.008(.203)
Typical Range
.197(5.0)
.220(5.59)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case:JEDEC DO-214AA low profile molded plastic
Terminals:Solder plated solderable per MIL-STD-750, Method 2026
Polarity:Indivated by cathode band except bi-directional types
Standard Packaging: 12mm tape (EIA STD EIA-481-1)
Weight:0.003 ounce, 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25⁰C ambient temperature unless otherwise specified.
RATINGS
Peak Pulse Power Dissipation at TA=25⁰C (NOTE 1,2,5)Fig.1
Peak Forward Surge Current per Figure 5(NOTE 3)
Peak Pulse Current Current on 10/1000 s waveform (NOTE 1, FIG.2)
Peak State Power Dissipation(NOTE 4)
Operating Junction and Storage Temperature Range
SYMBOL
PPPM
IFSM
IPPM
PM(AV)
TJ, TSTG
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25⁰C per Fig.2
2. Measured on 5.0mm² copper pads to each terminal
3. 8.3mm single half sine-wave duty cycle=4pulses per minuters maximum
4. Lead temperature at 75⁰C=TL
5. Peak pulse power waveform is 10/1000S
VALUE
Minimum 400
40.0
See Table 1
1.0
-55 to + 150
UNITS
Watts
Amps
Amps
Watts
0_C