MP15S Datasheet, PDF (1/2 Pages) CHENG-YI ELECTRONIC CO., LTD. – 15/25/35 AMPS. SILICON BRIDGE RECTIFIERS

MP15,25,35, S SERIES
15/25/35 AMPS.
SILICON BRIDGE RECTIFIERS
CHENG- YI
ELECTRONIC
VOLTAGE RANGE
50 TO 1000 VOLTS PRV
CURRENT
15.25.35. Amperes
FEATURES
The plastic material used carries Underwriters
Laboratory flammability recognition 94v-0
Integrally molded heats provide very low thermal
resistance for maximum heat dissipation.
Universt 4-way terminals; snap-on, wraparound
around, solder or P.C.board mounting
Surge overload rating to 400 Amperes
Terminals solderable per MIL-STD-202,
Method 208
Typical Soderable guaranteed:
250oC/10 second/.375"
solt Voltage from case to terminal over 2500 volts
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25⁰C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
MP 15/25/35 S
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
VRRM
VRMS
VDC
MP005S MP01S
50
100
35
70
50
100
MP02S
200
140
200
MP04S
400
280
400
MP06S
600
420
600
MP08S
800
560
800
MP10S
1000
700
1000
UNITS
V
V
V
Maximum Average Forward
15
15
Output Current @ ^TC=550C
KBPC25S
35
V(AV)
25
35
A
Peak Forward Surge Current
8.3 ms single half sine-wave
15
250
25
superimposed on rated load
IFSM
300
35
400
(JEDEC Mehtod)
Maximum Forward Voltage ¹⁵
7.5A
per Bridge element
KBPC25S at IF 12.5A
V_F
11
35
17.5A
Maximum DC Reverse Current at Rated DC
10
Blocking Voltage per
@ ^TA=250C
I_R
500
Bridge element
@ ^TA=1000C
I² t Rating for fusing (t<8.3ms)
I² t
374/664
Typical Thermal Resistance(Note.1)
R JC
2.0
Operating Temperature Range
T_J
-55 to +125
Storage Temperature Range
TSTG
-55 to +150
NOTE: 1.Mounted on a 11.8in² X 0.06 in thick (300mm² X 1.5mm thick ) Copper plate.
2.Fast Recovery, Controlled avalanche bridges are available. Please consuit with factory.
A
V
A
A
A²S
0_C/W
0_C
0_C