IN5391 Datasheet, PDF (1/2 Pages) CHENG-YI ELECTRONIC CO., LTD. – PLASTIC SILICON RECTIFIER

IN5391 thru IN5399
PLASTIC SILICON RECTIFIER
CHENG- YI
ELECTRONIC
VOLTAGE RANGE 50 TO 1000 Volts
CURRENT 1.5 Ampere
DO-15
FEATURE
Low forward voltage
High current capability
Low leakage current
High surge capability
Low cost
MECHANICAL DATA
Case:Molded plastic use UL 94V-0 recognized
Flame retardant epoxy
Terminals:Axial leads, solderable per
MIL-STD-202, method 208
Polarity:Color band denotes cathode
Mounting Position:Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25⁰C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
IN5391 IN5392 IN5393 IN5394 IN5395 IN5396 IN5397 IN5398 IN5399 UNITS
Maximum Recurrent Peak Reverse Voltage
50 100 200 300 400 500 600 800 1000
V
Maximum RMS Voltage
35
70 140 210 280 350 420 560 700
V
Maximum DC Blocking Voltage
50 100 200 300 400 500 600 800 1000
V
Maximum Average Forward Rectified Current
.375", (9.5mm) Lead Length at TA =70⁰C
1.5
A
Peak Forward Surge Current 8.3 ms single half sine-wave
60
A
Maximum Forward Voltage at 1.5A Peak
1.1
V
Maximum Reverse Current, Rated DC Blocking Voltage
5.0
A
Maximum Full Load Reverse Current, Full Cycle Average,
.375", (9.5mm) Lead Length at TA =55⁰C
30
A
Typical Junction Capacitance (Note 1)
25
pF
Typical Reverse Recovery Time (Note 2)
Operating and Storage Temperature Range TA
2
S
-65 to +175
0_C
Notes : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC
2. Measured with IF=0.5A, IR=1A, Irr=.25A