FR1A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT FAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 1.0 Ampere)

FR1A thru FR1K
SURFACE MOUNT FAST SWITCHENG
RECTIFIER
CHENG- YI
ELECTRONIC
VOLTAGE RANGE
-50 TO 800 VOLTS
CURRENT
-1.0 Amperes
SMB/DO-214AA
FEATURES
For surface mounted applications
Low profile package
Built-in strain relief
Easy pick and place
Fast recovery times for high efficiency
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Glass passivated chip junction
High temperature soldering
260^oC/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Indicated by cathode band
Standard Packaging: 12mm tape (EIA-481)
Weight: 0.003 ounces, 0.093 gram
.075(1.91)
.083(2.11)
.130(3.30)
.155(3.94)
.083(2.13)
.096(2.44)
.030(0.76)
.050(1.27)
.160(4.06)
.185(4.70)
.006(.152)
.012(.305)
.002(.051)
.008(.203)
.200(5.08)
.220(5.59)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25⁰C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, reistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOLS FR1A
FR1B
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
Maximum RMS Voltage
VRMS
35
70
Maximum DC Blocking Voltage
VDC
50
100
Maximum Average Forward Rectified Current,
at TL=90⁰C
I(AV)
FR1D
200
140
200
FR1G
400
280
400
1.0
FR1J
600
420
600
FR1K
800
560
800
UNITS
V
V
V
A
Peak Forward Surge Current
8.3 ms single half sine-wave superimposed
IFSM
on rated load (JEDEC Method)
Maximum Instantaneous Forward Voltage at 1.0A V_F
Maximum DC Reverse Current @ ^TA=250C
at Rated DC Blocking Voltage @ ^TA=1250C
I_R
Maximum Reverse Recovery Time (Note 1) TJ=25⁰C
Typical Junction Capacitance (Note 2)
Maximum Thermal Resistance (Note 3)
T_RR
C_J
R JL
Operating and Storage Temperature Range
T_J , TSTG
Notes : 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1.0 MHZ and Applied Vr=4.0 volts.
3. 8.0mm² (.013mm thick) land areas.
30
1.30
5.0
150
150
12
32
-50 to +150
A
V
A
250
500
nS
pF
0_C/W
0_C