ER3A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT RECTIFIER(VOLTAGE- 50 to 600 Volts CURRENT - 3.0 Amperes)

ER3A thru ER3J
SURFACE MOUNT SUPERFAST
RECTIFIER
CHENG- YI
ELECTRONIC
VOLTAGE RANGE
-50 TO -600 VOLTS
CURRENT
-3.0 Amperes
SMC/DO-214AB
FEATURES
For surface mounted applications
Low profile package
Built-in strain relief
Easy pick and place
Superfast recovery times for high efficiency
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Glass passivated junction
High temperature soldering:
260^oC/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AB molded plastic
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Indicated by cathode band
Standard Packaging: 16mm tape (EIA-481)
Weight: 0.007 ounces, 0.21 gram
.108(2.75)
.128(3.25)
.220(5.59)
.245(6.22)
.079(2.00)
.103(2.62)
.030(0.76)
.050(1.27)
.260(6.60)
.280(7.11)
.006(.152)
.012(.305)
.002(.051)
.008(.203)
.305(7.75)
.320(8.13)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25⁰C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, reistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOLS ER3A ER3B
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
Maximum RMS Voltage
VRMS
35
70
Maximum DC Blocking Voltage
VDC
50
100
Maximum Average Forward Rectified Current,
at TL=75⁰C
I(AV)
ER3C
150
105
150
ER3D
200
140
200
3.0
ER3E
300
210
300
ER3G
400
280
400
ER3J
600
420
600
UNITS
V
V
V
A
Peak Forward Surge Current
8.3 ms single half sine-wave superimposed
IFSM
100
A
on rated load (JEDEC Method)
Maximum Instantaneous Forward Voltage at 3.0A V_F
0.95
1.25
1.7
V
Maximum DC Reverse Current @ ^TA=250C
5.0
at Rated DC Blocking Voltage @ ^TA=1000C
I_R
200
A
Maximum Reverse Recovery Time (Note 1)
T_RR
35.0
nS
Typical Junction Capacitance (Note 2)
C_J
45.0
pF
Maximum Thermal Resistance (Note 3)
R JL
16
0_C/W
Operating and Storage Temperature Range
T_J , TSTG
-50 to +150
0_C
Notes : 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1.0 MHZ and Applied Vr=4.0 volts.
3. 8.0mm² (.013mm thick) land areas.