ER2A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT SUPERFAST RECTIFIER(VOLTAGE - 50 to 600 Volts CURRENT - 2.0 Amperes)

ER2A thru ER2J
SURFACE MOUNT SUPERFAST
RECTIFIER
CHENG- YI
ELECTRONIC
VOLTAGE RANGE
-50 TO -600 VOLTS
CURRENT
-2.0 Amperes
SMB/DO-214AA
FEATURES
For surface mounted applications
Low profile package
Built-in strain relief
Easy pick and place
Superfast recovery times for high efficiency
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Glass passivated junction
High temperature soldering:
260^oC/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Indicated by cathode band
Standard Packaging: 12mm tape (EIA-481)
Weight: 0.003 ounces, 0.093 gram
.075(1.91)
.083(2.11)
.130(3.30)
.155(3.94)
.083(2.13)
.096(2.44)
.030(0.76)
.050(1.27)
.160(4.06)
.185(4.70)
.006(.152)
.012(.305)
.002(.051)
.008(.203)
.200(5.08)
.220(5.59)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25⁰C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, reistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOLS ER2A ER2B
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
Maximum RMS Voltage
VRMS
35
70
Maximum DC Blocking Voltage
VDC
50
100
Maximum Average Forward Rectified Current,
at TL=110⁰C
I(AV)
ER2C
150
105
150
ER2D
200
140
200
2.0
ER2E
300
210
300
ER2G
400
280
400
ER2J
600
420
600
UNITS
V
V
V
A
Peak Forward Surge Current
8.3 ms single half sine-wave superimposed
IFSM
50.0
A
on rated load (JEDEC Method)
Maximum Instantaneous Forward Voltage at 2.0A V_F
0.95
1.25
1.7
V
Maximum DC Reverse Current @ ^TA=250C
5.0
at Rated DC Blocking Voltage @ ^TA=1000C
I_R
150
A
Maximum Reverse Recovery Time (Note 1)
T_RR
35.0
nS
Typical Junction Capacitance (Note 2)
C_J
25.0
pF
Maximum Thermal Resistance (Note 3)
R JL
20.0
0_C/W
Operating and Storage Temperature Range
T_J , TSTG
-50 to +150
0_C
Notes : 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1.0 MHZ and Applied Vr=4.0 volts.
3. 8.0mm² (.013mm thick) land areas.