5KP Datasheet, PDF (1/2 Pages) Surge Components – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 to 110 Volts

5KP SERIES
GLASS PASSIVATED JUNCTION TRAN-
SIENT VOLTAGE SUPPRESSOR
CHENG- YI
ELECTRONIC
VOLTAGE
5.0 to 110 VOLTS
5000 WATT PEAK PULSE POWER
P600
FEATURES
Plastic package has Underwrites Laboratory
Flammability Classification 94V-O
Glass passivated junction
5000W Peak Pulse Power capability on
10/1000 s waveform
Excellent clamping capability
Repetition rate (Duty Cycle):0.5%
Low incremental surge resistance
Fast response time: typically less than 1.0 ps
from 0 volts to BV
Typical ID less than 1 A above 10V
High temperature soldering guaranteed:
300^oC/10 seconds /.375',(9.5mm)
lead length/51bs.,(2.3kg) tension
MECHANICAL DATA
Case:Molded plastic over glass passivated junction
Terminals:Plated Axial leads, solderable per MIL-STD-750, Method 2026
Polarity:Color band denote positive end (cathode)
Mounting Position:Any
Weight:0.07 ounces, 2.1gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25⁰C ambient temperature unless otherwise specified.
RATINGS
Peak Pulse Power Dissipation on 10/1000 s waveform (NOTE 1,Fig.1)
Peak Pulse Current of on 10/1000 s waveform (NOTE 1,Fig.3)
Steady Power Dissipation at TL=75⁰C
Lead Lengths .375",(9.5mm)(NOTE 2)
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load(JEDEC Method)(NOTE 3)
Operating Junction and Storage Temperature Range
SYMBOL
PPPM
PPPM
PM(AV)
IFSM
TJ, TSTG
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25^oC per Fig.2
2. Mounted on Copper Leaf area of 0.79 in² (20mm²)
3. Measured on 8.3ms single half sine-wave or equivalent square wave,
Duty Cycle=4 pulses per minuters maximum.
VALUE
Minimum 5000
SEE TABLE 1
8.0
400
-55 to + 175
UNITS
Watts
Amps
Watts
Amps
0_C