CD2S Datasheet, PDF (2/3 Pages) Microdiode Electronics (Jiangsu) Co.,Ltd. – 200 to 1000 Volts Current - 1.0 Ampere

Based on MIL-STD-105E LEVEL II , set the acceptable level as below.
Item Critical
Major
Minor
0.10(Electrical)
AQL(%) 0.01 0.25(Physical) 1.00
Signification , Storage and Shipment
1. The signification on the bridge rectifier body can be determined by customer.
It will be 100% followed up as the instruction from customer.
2. The parts will be packed in the boxes, and the quantity in one box can be
offered by customer. The boxes will be delivered by internal express company.
3. Please keep the parts being stored in the environment with humidity lower
than 75%.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load, for capacitive load derate current by 20%.
MDD Catalog Number
SYMBOLS
MDD
CD2S
MDD
CD4S
MDD
CD6S
MDD
CD8S
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
VRRM
200
400
600
800
VRMS
140
280
420
560
VDC
200
400
600
800
Maximum average forward rectified current
at TA=75
IF(AV)
1.0
Peak forward surge current,
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method)
Maximum instantaneous forward voltage drop
VF
per leg at 0.4A
Maximum DC reverse current TA=25
at rated DC blocking voltage TA=75
Typical junction capactiance per leg(Note)
Typical thermal resistance per leg
Operating temperature range
storage temperature range
IR
CJ
R JA
TJ
TSTG
NOTES: Measured at 1.0MHz and applied reverse voltage of 4.0 volts.
35
1.0
5.0
50
15
30
-55 to +150
-55 to +150
MDD
CD10S
1000
700
1000
UNITS
VOLTS
VOLTS
VOLTS
Amps
Amps
Volts
uA
uA
pF
/W