SFM11-M Datasheet, PDF (1/2 Pages) Formosa MS – Super fast recovery type

SOD-123FL
Cathode Band
Top View
2.80.1
SFM11-M THRU SFM18-M
SURFACE MOUNT SUPER FAST RECTIFIER
Reverse Voltage - 50 to 600 Volts Forward Current - 1.0 Ampere
FEATURES
Glass passivated device
Ideal for surface mouted applications
Low reverse leakage
Metallurgically bonded construction
High temperature soldering guaranteed:
250 C/10 seconds,0.375”(9.5mm) lead length,
5 lbs. (2.3kg) tension
0.60.25
3.70.2
Dimensions in millimeters
MECHANICAL DATA
Case: JEDEC SOD-123FL molded plastic body over passivated chip
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.0007 ounce, 0.02 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
MDD Catalog Number
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
SYMBOLS _{SFM11-M SFM12-M SFM13-M} SFM14-M SFM15-M SFM16-M SFM18-M _UNITS
E1A E1B E1C
E1D
E1E
E1G
E1J
VRRM
50
100 150
200
300
400 600 VOLTS
VRMS
35
70
105 140 210
280 420 VOLTS
VDC
50
100 150
200
300
400 600 VOLTS
I(AV)
1.0
Amp
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage at1.0A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
IFSM
VF
IR
trr
CJ
RθJA
TJ,TSTG
25.0
0.95
1.25
5.0
100.0
35
10
85
-55 to +150
Amps
1.7
Volts
µA
ns
pF
°C/W
C
Note: 1.Measured with IF=0.5A, IR=1A, Irr=0.25A.
2.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3.PCB mounted on 0.2*0.2" (5.0*5.0mm) coppeer pad area.