SF51G Datasheet, PDF (1/2 Pages) Micro Commercial Components – 5 Amp High Efficiency Glass Passivated Rectifier 50 to 600 Volts

SF51G THRU SF58G
DO-201AD
0.220(5.6)
0.197(5.0)
DIA.
1.0 (25.4)
MIN.
0.375(9.5)
0.285(7.2)
0.052(1.3)
0.048(1.2)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
SUPER FAST RECTIFIER
Reverse Voltage - 50 to 600 Volts Forward Current -5.0 _Amperes
FEATURES
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Super fast switching for high efficiency
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
250 C/10 seconds,0.375”(9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-201AD molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.04 ounce, 1.10 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
MDD Catalog Number
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375”(9.5mm) lead length at TA=55 C
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 5.0A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
SYMBOLS _{SF51G SF52G SF53G SF54G SF55G SF56G SF58G} UNITS
VRRM
VRMS
VDC
50 100 150 200 300 400 600 VOLTS
35 70 105 140 210 280 420 VOLTS
50 100 150 200 300 400 600 VOLTS
I(AV)
5.0
Amps
IFSM
VF
IR
trr
CJ
RθJA
TJ,TSTG
150.0
Amps
0.95
1.25
1.7
10.0
50.0
35
100.0
50.0
30.0
-65 to +150
Volts
µA
ns
pF
C/W
C
Note:1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
2.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3.Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted