S2AW Datasheet, PDF (1/2 Pages) Microdiode Electronics (Jiangsu) Co.,Ltd. – SU RFACE MOUNT GENERAL PURPOSE SILICON RECTIFIER

SOD-123FL
Cathode Band
Top View
2.80.1
S2AW THRU S2MW
SU R FACE MOUNT GENERAL PURPOSE SILICON RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Ampere
FEATURES
Glass passivated device
Ideal for surface mouted applications
Low reverse leakage
Metallurgically bonded construction
High temperature soldering guaranteed:
250 C/10 seconds,0.375”(9.5mm) lead length,
5 lbs. (2.3kg) tension
0.60.25
3.70.2
Dimensions in millimeters
MECHANICAL DATA
Case: JEDEC SOD-123FL molded plastic body over passivated chip
Terminals: Solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.0007 ounce, 0.02 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
SYMBOLS
MDD Catalog Number
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
VRRM
VRMS
VDC
Maximum average forward rectified current
I(AV)
at TA=65 C (NOTE 1)
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method) TL=25 C
Maximum instantaneous forward voltage at 2.0A
VF
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=125 C
IR
Typical junction capacitance (NOTE 2)
CJ
Typical thermal resistance (NOTE 3)
RθJA
Operating junction and storage temperature range _TJ,TSTG
S2AW
2D1
50
35
50
S2BW
2D2
100
70
100
S2DW
2D3
200
140
200
S2GW
2D4
400
280
400
S2JW
2D5
600
420
600
2.0
50
1.1
10.0
50.0
30
90
-55 to +150
S2KW
2D6
800
560
800
Note: 1.Averaged over any 20ms period.
2.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3.Thermal resistance from junction to ambient at 0.375” (9.5mm)lead length,P.C.B. mounted
S2MW
2D7
1000
700
1000
UNITS
VOLTS
VOLTS
VOLTS
Amp
Amps
Volts
µA
pF
°C/W
C