S1ABF Datasheet, PDF (1/2 Pages) DONGGUAN YOU FENG WEI ELECTRONICS CO., LTD – Surface MountGeneral Purpose Silicon Rectifiers

S1ABF THRU S1MBF
SURFACE MOUNT GENERAL RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere
0.146(3.70)
0.138(3.50)
0.051(1.30)
0.043(1.10)
0.051(1.30)
0.039(1.0)
SMBF
Cathode Band
Top View
0.086(2.20)
0.075(1.90)
0.173(4.4)
0.165(4.2)
0.010(0.26)
0.0071(0.18)
0.216(5.5)
0.200(5.1)
Dimensions in inches and (millimeters)
FEATURES
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
For surface mounted applications
Low reverse leakage
Built-in strain relief,ideal for automated placement
High forward surge current capability
High temperature soldering guaranteed:
260 C/10 seconds at terminals
Glass passivated chip junction
MECHANICAL DATA
Case: JEDEC SMBF molded plastic body
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight _{:57mg/0.002oz}
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
MDD Catalog Number
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TL=75 C
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Typical junction capacitance (NOTE 1)
Typical thermal resistance (NOTE 2)
Operating junction and storage temperature range
SYMBOLS S1ABF S1BBF S1DBF S1GBF S1JBF S1KBF S1MBF UNITS
VRRM
VRMS
VDC
50 100 200 400 600 800 1000 VOLTS
35 70 140 280 420 560 700 VOLTS
50 100 200 400 600 800 1000 VOLTS
I(AV)
1.0
Amp
IFSM
VF
IR
CJ
RθJA
TJ,TSTG
30.0
1.1
5.0
50.0
15.0
75.0
-50 to +150
Amps
Volts
µA
pF
C/W
C
Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2.P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas