S03K Datasheet, PDF (1/2 Pages) Microdiode Electronics (Jiangsu) Co.,Ltd. – Surface Mount Standard Rectifiers

DSR0.3A THRU DSR0.3M
SOD-123FL
Cathode Band
Top View
2.80.1
0.60.25
3.70.2
Dimensions in millimeters
Surface Mount Standard Rectifiers
Reverse Voltage - 50 to 1000 Volts Forward Current - _{0.3 Ampere}
Features
Low profile space
Ideal for automated placement
Glass passivated chip junctions
Low forward voltage drop
Low leakage current
High forward surge capability
High temperature soldering：
260℃/10 seconds at terminals
Component in accordance to
RoHS 2002/95/1 and WEEE 2002/96/EC
Mechanical Date
Case: JEDEC SOD-123FL molded plastic
body over glass passivated chip
Terminals: Solder plated, solderable per
J-STD-002B and JESD22-B102D
Polarity: Laser band denotes cathode end
Weight: 0.017gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
SYMBOLS S03A S03B S03D S03G S03J
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
VRRM
50 100 200 400
600
VRMS
35
70
140 280
420
VDC
50 100
200 400
600
Maximum average forward rectified current
I(AV)
0.3
at TA=65 C (NOTE 1)
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
15.0
rated load (JEDEC Method) TL=25 C
Maximum instantaneous forward voltage at 0.3A
VF
1.1
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
IR
5.0
50.0
Typical junction capacitance (NOTE 2)
CJ
Typical thermal resistance (NOTE 3)
RθJA
Operating junction and storage temperature range _TJ,TSTG
4
220
-55 to +150
Note1: Mounted on FR-4 P.C.B. With 0.9x1.5 mm copper pad areas (≈35 μm thick)
S03K
800
560
800
S03M
1000
700
1000
UNITS
VOLTS
VOLTS
VOLTS
Amp
Amps
Volts
µA
pF
K/W
C
MDD ELECTRONIC