P6KE6.8 Datasheet, PDF (1/4 Pages) Daesan Electronics Corp. – POWER 600Watts VOLTAGE 6.8 to 440 Volts

P6KE6.8 THRU P6KE440CA
GLASS PASSIVAED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage:6.8-440 Volts Peak Pulse Power:600 Watts
DO-15
0.140 (3.6)
0.104(2.6)
DIA.
1.0(25.4)
MIN.
0.300(7.6)
0.230(5.8)
0.034 (0.86)
0.028 (0.70)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
FEATURE
600w peak pulse power capability
Excellent clamping capability
Low incremental surge resistance
Fast response time:typically less than 1.0ps from 0v to
VBR for unidirectional and 5.0ns ror bidirectional types.
High temperature soldering guaranteed:
265 C/10S/9.5mm lead length at 5 lbs tension
MECHANICAL DATA
Case: JEDEC DO-15 molded plastic body over
passivated junction
Terminals: Plated axial leads, solderable per MIL-STD 750,
method 2026
Polarity: Color band denotes cathode except for
bidirectional types
Mounting Position: Any
Weight: 0.014 ounce,0.40 grams
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bidirectional use suffix C or CA for types P6KE6.8 thru P6KE440 (e.g. P6KE6.8CA,P6KE440CA)
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
SYMBOLS
VALUE
UNITS
Peak power dissipation
(Note 1)
Peak pulse reverse current (Note 1, Fig.3)
Steady state power dissapation (Note 2)
Peak forward surge current (Note 3)
Maximum instantaneous forward voltage at 50A
for unidirectional only
(Note 4)
Operating junction and storage temperature range
Pppm
Ippm
PM(AV)
IFSM
VF
TSTG,TJ
Minimum 600
See Table 1
5.0
100
3.5/5.0
-55 to + 175
Notes:
1.10/1000µs waveform non-repetitive current pulse,per Fig.3 and derated above Ta=25 C per Fig.2
2.TL=75 C,lead lengths 9.5mm,Mounted on copper pad atea of (40x40mm)Fig.5
3.Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
4.VF=3.5V max.for devices of V(BR)<200V,and VF=5.0V max.for devices of V(BR)>200V
Watts
Amps
Watts
Amps
Volts
C