MURF1040CT Datasheet, PDF (1/2 Pages) Sangdest Microelectronic (Nanjing) Co., Ltd – ULTRAFAST PLASTIC RECTIFIER

MURF1040CT
ULTRA FAST RECTIFIERS
Reverse Voltage - 400 Volts Forward Current - 10.0 Amperes
ITO-220AB
10.2± 0.2
4.5± 0.2
3.1^+-00..12
PIN
1 23
4.0± 0.3
1.4± 0.1
0.6± 0.1
2.6± 0.2
2.6± 0.15
PIN 1
PIN 3
PIN 2
CASE
0.6± 0.1
Dimensions in inches and (millimeters)
FEATURES
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Construction utilizes void-free
molded plastic technique
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
250 C,0.25”(6.35mm) from case for 10 seconds
MECHANICAL DATA
Case: TO-220AB molded plastic body
Terminals: Leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight:0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
Rating
Symbol MURF1040CT
Unit
Peak Repetitive Reverse Voltage
Average Rectified Forward Current ^{(Rated V}R^{) T}C ^{= 133°C}
V_RRM
400
V
I_F(AV)
5
A
Peak Repetitive Forward Current ^{(Rated V}R^{, Square Wave, 20 kHz) T}_C ^{= 133°C}
I_FRM
10
A
Maximum Instantaneous Forward Voltage ⁽ⁱF ^{=5Amps, T} C ^{= 25°C)}
Nonrepetitive Peak Surge Current
(Surge applied at rates load conditions halfwave, single phase, 60Hz)
Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz)
Operating Junction Temperature
Voltage Rate of Change (Rated V_R)
Maximum Instantaneous Reverse Current
(Rated dc Voltage, TC = 125°C)
(Rated dc Voltage, TC = 25°C)
Recovery TIME ^IF ^{= 1A, dI}F^{/dt = 200A/µ}s
v_F
1.3
V
I_FSM
150
A
I_RRM
T_J
dv/dt
5
A
- 65 to +175
°C
10,000
V/ms
IR
6.0
mA
0.01
t_rr
30
ns