MBRF2020CT Datasheet, PDF (1/2 Pages) Micro Commercial Components – 20 Amp Schottky Barrier Rectifier 20 to 100 Volts

MBRF2020CT THRU MBRF20100CT
SCHOTTKY BARRIER RECTIFIER
Reverse Voltage - 20 to 100 Volts Forward Current - 20.0 Amperes
ITO-220AB
10.2± 0.2
4.5± 0.2
3.1^+-00..12
PIN
1 23
4.0± 0.3
1.4± 0.1
0.6± 0.1
2.6± 0.2
2.6± 0.15
PIN 1
PIN 3
PIN 2
CASE
0.6± 0.1
Dimensions in inches and (millimeters)
FEATURES
High surge capacity.
For use in low voltage, high frequency inverters,free
wheeling,and polarity protection applications.
Metal silicon junction,majority carrier conduction.
High current capability,low forward voltage drop.
Guard ring for over voltage protection.
MECHANICAL DATA
Case: ITO-220AB molded plastic body
Terminals: Leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight:0.060 ounce, 1.67 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
MDD Catalog Number
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at Tc(see fig.1)
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 10.0A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Typical junction capacitance (NOTE 1)
Typical thermal resistance (NOTE 2)
Operating junction temperature range
Storage temperature range
SYMBOLS
MBRF MBRF MBRF
2020CT 2030CT 2040CT
MBRF MBRF MBRF MBRF MBRF MBRF MBRF
2045CT 2050CT 2060CT 2070CT 2080CT 2090CT 20100CT
UNITS
VRRM ^{20 30 40 45 50 60 70 80 90 100 VOLTS}
VRMS ^{14 21 28 32 35 42 49 56 63 70 VOLTS}
VDC ^{20 30 40 45 50 60 70 80 90 100 VOLTS}
I(AV)
20.0
Amps
IFSM
VF
IR
CJ
RθJC
TJ
TSTG
0.55
15.0
550
-55 to +125
150.0
0.75
0.85
1.0
50.0
450
2.0
-55 to +150
-55 to +150
Amps
Volts
mA
pF
C/W
C
C
Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2.Thermal resistance from junction to case