MBRF1020CT Datasheet, PDF (1/2 Pages) Micro Commercial Components – 10 Amp Schottky Barrier Rectifier 20 to 100 Volts

MBRF1020CT THRU MBRF10100CT
SCHOTTKY BARRIER RECTIFIER
Reverse Voltage - 20 to 100 Volts Forward Current -10.0 Amperes
ITO-220AB
10.2± 0.2
4.5± 0.2
3.1^+-00..12
FEATURES
High surge capacity.
For use in low voltage, high frequency inverters,free
wheeling,and polarity protection applications.
Metal silicon junction,majority carrier conduction.
High current capability,low forward voltage drop.
Guard ring for over voltage protection.
PIN
1 23
4.0± 0.3
1.4± 0.1
2.6± 0.2
MECHANICAL DATA
0.6± 0.1
2.6± 0.15
PIN 1
PIN 3
PIN 2
CASE
0.6± 0.1
Dimensions in inches and (millimeters)
Case: ITO-220AB molded plastic body
Terminals: Leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight:0.060 ounce, 1.67 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
MDD Catalog Number
SYMBOLS
MBRF MBRF MBRF MBRF MBRF MBRF MBRF MBRF MBRF MBRF
1020CT 1030CT 1040CT 1045CT 1050CT 1060CT 1070CT 1080CT 1090CT 10100CT
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
(see fig.1)
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 5.0A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Typical junction capacitance (NOTE 1)
Typical thermal resistance (NOTE 2)
Operating junction temperature range
Storage temperature range
VRRM
VRMS
VDC
I(AV)
IFSM
VF
IR
CJ
RθJC
TJ
TSTG
20 30 40 45 50 60 70 80 90 100
14 21 28 32 35 42 49 56 63 70
20 30 40 45 50 60 70 80 90 100
10.0
0.55
15.0
550
-50 to +125
150.0
0.75
0.85
1.0
50.0
450
2.0
-50 to +150
-50 to +150
Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
UNITS
VOLTS
VOLTS
VOLTS
Amps
Amps
Volts
mA
pF
C/W
C
C
2.Thermal resistance from junction to case