MBR4040CT Datasheet, PDF (1/2 Pages) Kersemi Electronic Co., Ltd. – 40 Amp Schottky Barrier Rectifier 20 to 60 Volts

MBR4040CT THRU MBR40200CT
SCHOTTKY BARRIER RECTIFIER
Reverse Voltage - 40 to 200 Volts Forward Current - 40.0 Amperes
TO-220AB
0.160 (4.05)
0.140 (3.55)
0.105 (2.67)
0.095 (2.41)
0.415(10.54)
MAX
0.410(10.41)
0.390(9.91)
PIN
123
0.154(3.91) _DIA
0.148(3.74)
0.113(2.87)
0.103(2.62)
0.635(16.13)
0.625(15.87)
0.185(4.70)
0.175(4.44)
0.057(1.45)
0.051(1.30)
0.145(3.68)
0.135(3.43)
0.350(8.89)
0.330(8.38)
0.560(14.2)
0.530(13.4)
1.148(29.16)
1.118(28.40)
0.590(14.22)
0.530(13.46)
0.110(2.79)
0.100(2.54)
0.037(0.94)
0.027(0.68)
0.105 (2.67)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
PIN 1
PIN 3
PIN 2
CASE
0.022(0.58)
0.014(0.35)
Dimensions in inches and (millimeters)
FEATURES
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Construction utilizes void-free
molded plastic technique
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
250 C,0.25”(6.35mm) from case for 10 seconds
MECHANICAL DATA
Case: TO-220AB molded plastic body
Terminals: Leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight:0.080 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
MDD Catalog Number
SYMBOLS
MBR MBR MBR MBR MBR MBR MBR MBR MBR
4040CT 4045CT 4050CT 4060CT 4070CT 4080CT 4090CT 40100CT 40150CT
MBR
40150CT
UNITS
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
VRRM
VRMS
VDC
40 45 50
28 32 35
40 45 50
60 70 80 90 100 150
42 49 56 63 70 105
60 70 80 90 100 150
200 VOLTS
140 VOLTS
200 VOLTS
Maximum average forward rectified current
I(AV)
(see fig.1)
40.0
Amps
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
200.0
Amps
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 20.0A VF
0.7
0.8
0.85
0.92
Volts
Maximum DC reverse current TA=25 C
0.1
at rated DC blocking voltage TA=100 C
IR
20
0.05
mA
20
Typical junction capacitance (NOTE 1)
CJ
750
500
pF
Typical thermal resistance (NOTE 2)
RθJC
2.2
C/W
Operating junction temperature range
TJ
-50 to +125
-50 to +150
C
Storage temperature range
TSTG
-50 to +150
C
Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2.Thermal resistance from junction to case