KBPC25005 Datasheet, PDF (1/2 Pages) Shanghai Sunrise Electronics – SINGLE PHASE SILICON BRIDGE RECTIFIER

KBPC25005 THRU KBPC2510
SILICON BRIDGE RECTIFIERS
Reverse Voltage - 50 to 1000 Volts Forward Current - 25.0 Amperes
KBPC-25
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
.452 _MAX.
(11.5)
0.480(12.2)
0.425(10.8)
HOLE FOR
NO.8 SCREW
FEATURES
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Ideal for printed circuit boards
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
260 C/10 seconds,5 lbs. (2.3kg) tension
0.732(18.6)
0.692(17.6)
AC
+
-
AC
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
0.582(14.8)
0.543(13.8)
0.033x0.250
(0.8x6.4)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case:Metal case
Terminals: Plated 0.25” (6.35mm)lug.
Polarity: Polarity symbols marked on case
Mounting:Thru hole for #8 screw,20in.-lbs. torque max.
Weight:1.02 ounce, 29 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase,half wave 60Hz,resistive or inductive load,for current capacitive load, derate by 20%.
MDD Catalog Number
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward output rectified
current at TC=50 C (Note 1,2)
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Rating for Fusing(t<8.3ms)
Maximum instantaneous forward voltage dorp
per bridge element at 12.5A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Isolation voltage from case to leads
Typical Thermal Resistance (Note 2)
Operating junction temperature range
storage temperature range
SYMBOLS
VRRM
VRMS
VDC
KBPC
25005
50
35
50
I(AV)
KBPC
2501
100
70
100
KBPC
2502
200
140
200
KBPC
2504
400
280
400
25
KBPC
2506
600
420
600
IFSM
I²t
VF
IR
VISO
RθJA
TJ
TSTG
300.0
373
1.1
10
1.0
2500
2.0
-65 to +150
-65 to +150
NOTES:
1.Unit mounted on 5” x 6” x4.9” thick(12.8cmx15.2cmx12.4cmcm)Al.plate.
2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for
maximum heat transfer efficiency with #8 screw.
KBPC
2508
800
560
800
KBPC
2510
UNITS
1000 ^VOLTS
700 ^VOLTS
1000 ^VOLTS
Amps
Amps
A²s
Volts
µA
mA
VAC
C/W
C
C