KBPC15005W Datasheet, PDF (1/2 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER

KBPC15005W THRU KBPC1510W
SILICON BRIDGE RECTIFIERS
Reverse Voltage - 50 to 1000 Volts Forward Current - 15.0 Amperes
KBPC-25W
0.452 _MAX.
(11.5)
0.042(1.10) DIA.
0.038(0.97)
0.591 _MAX.
(15.0)
FEATURES
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Ideal for printed circuit boards
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
260 C/10 seconds,at 5 lbs. (2.3kg) tension
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
HOLE FOR
NO.8 SCREW
MECHANICAL DATA
0.732(18.6)
0.692(17.6)
AC
+
-
AC
1.181(30.0)
1.102(28.0)
0.468(11.9)
0.429(10.9)
0.732(18.6)
0.692(17.6)
0.033x.250
(0.8x6.4)
Dimensions in inches and (millimeters)
Case: Metal case
Terminals: Lead 0.040” (1.02mm) diameter.
Polarity: Polarity symbols marked on case
Mounting:Thru hole for #8 screw,20in.-lbs. torque max.
Weight:0.93 ounce, 26.4 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase,half wave 60Hz,resistive or inductive load,for current capacitive load, derate by 20%.
MDD Catalog Number
SYMBOLS
KBPC
15005W
KBPC
1501W
KBPC
1502W
KBPC
1504W
KBPC
1506W
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward output rectified
current at TC=55 C (Note 1,2)
VRRM
50
100 200 400 600
VRMS
35
70 140 280 420
VDC
50
100 200 400 600
I(AV)
15
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method)
300.0
Rating for Fusing(t<8.3ms)
I²t
373
Maximum instantaneous forward voltage dorp
per bridge element at 7.5A
VF
1.1
Maximum DC reverse current TA=25 C
IR
at rated DC blocking voltage TA=100 C
Isolation voltage from case to leads
VISO
Typical Thermal Resistance (Note 2)
RθJA
Operating junction temperature range
TJ
storage temperature range
TSTG
10
1.0
2500
2.0
-65 to +150
-65 to +150
NOTES:
1.Unit mounted on 5” x 4” x3” thick(12.8cmx10.2cmx7.3cm)Al.plate.
2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for
maximum heat transfer efficiency with #8 screw.
KBPC
1508W
800
560
800
KBPC
1510W
UNITS
1000 ^VOLTS
700 ^VOLTS
1000 ^VOLTS
Amps
Amps
A²s
Volts
µA
mA
VAC
C/W
C
C