GS3AF Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – SURFACE MOUNT GENERAL RECTIFIER

GS3AF THRU GS3MF
SURFACE MOUNT GENERAL RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes
SMAF
FEATURES
0.106(2.70)
0.094(2.40)
0.051(1.30)
0.043(1.10)
Cathode Band
Top View
0.063(1.60)
0.051(1.30)
0.146(3.7)
0.130(3.3)
0.0091(0.23)
0.0071(0.18)
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
For surface mounted applications
Low reverse leakage
Built-in strain relief,ideal for automated placement
High forward surge current capability
Glass passivated chip junction
0.051(1.30)
0.039(1.0)
MECHANICAL DATA
0.193(4.90)
0.173(4.40)
Dimensions in inches and (millimeters)
Case: JEDEC SMAF molded plastic body over passivated chip
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.0018 ounce, 0.064 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
MDD Catalog Number
SYMBOLS _{GS3AF GS3BF GS3DF GS3GF GS3JF GS3KF GS3MF} UNITS
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TL=75 C
VRRM
VRMS
VDC
I(AV)
50 100 200 400 600 800 1000 VOLTS
35 70 140 280 420 560 700 VOLTS
50 100 200 400 600 800 1000 VOLTS
3.0
Amps
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 3.0A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=125 C
Typical junction capacitance (NOTE 1)
Typical thermal resistance (NOTE 2)
Operating junction and storage temperature range
IFSM
VF
IR
CJ
RθJA
TJ,TSTG
100.0
1.2
5.0
250.0
53.0
13.0
47.0
-50 to +150
Amps
Volts
µA
pF
C/W
C
Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2.P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas