DSR1A Datasheet, PDF (1/2 Pages) Microdiode Electronics (Jiangsu) Co.,Ltd. – SUFACE MOUNT GENERAL PURPOSE SILICON RECTIFIER

DSR1A THRU DSR1M
SOD-123FL
Cathode Band
Top View
2.80.1
SUFACE MOUNT GENERAL PURPOSE SILICON RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere
FEATURES
Glass passivated device
Ideal for surface mouted applications
Low reverse leakage
Metallurgically bonded construction
High temperature soldering guaranteed:
250 C/10 seconds,0.375”(9.5mm) lead length,
5 lbs. (2.3kg) tension
0.60.25
3.70.2
Dimensions in millimeters
MECHANICAL DATA
Case : JEDEC SOD-123FL molded plastic body over passivated chip
Terminals : Solderable per MIL-STD-750,
Method 2026
Polarity : Color band denotes cathode end
Mounting Position : Any
Weight :0.006 ounce, 0.02 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
MDD Catalog Number
SYMBOLS
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TA=65 C (NOTE 1)
VRRM
VRMS
VDC
I(AV)
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method) TL=25 C
Maximum instantaneous forward voltage at 1.0A
VF
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=125 C
IR
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
CJ
RθJA
TJ,TSTG
DSR1A DSR1B
S1A S1B
50 100
35
70
50 100
DSR1D DSR1G DSR1J
S1D
S1G
S1J
200 400
600
140 280
420
200 400
600
1.0
25.0
1.1
10.0
50.0
4
180
-55 to +150
DSR1K
S1K
800
560
800
DSR1M
S1M
1000
700
1000
UNITS
VOLTS
VOLTS
VOLTS
Amp
Amps
Volts
µA
pF
°C/W
C
Note: 1.Averaged over any 20ms period.
2.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3.Thermal resistance from junction to ambient at 0.375” (9.5mm)lead length,P.C.B. mounted