1SMA4728 Datasheet, PDF (1/4 Pages) Pan Jit International Inc. – SURFACE MOUNT SILICON ZENER DIODE

1SMA4728 THRU 1SMA200A
ZENER DIODES
Zener Voltage: 3.3-200V Peak Pulse Power: 1W
0.067 (1.70)
0.051 (1.30)
DO-214AC/SMA
0.110(2.80)
0.100(2.54)
0.177(4.50)
0.157(3.99)
0.012(0.305)
0.006(0.152)
FEATURE
For surface mounted applications in order to optimize
board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
Typical I_R less than 5.0 A above 11V
High temperature soldering guaranteed:
260^OC / 10 seconds at terminals
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
0.096(2.42)
0.078(1.98)
0.060(1.52)
0.030(0.76)
0.008(0.203)MAX.
0.208(5.28)
0.188(4.80)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: Molded plastic over passivated junction
Terminals: Plated leads, solderable per MIL-STD 750,
method 2025
Polarity: Color band denotes cathode end
Standard packaging:12mm tape (EIA-481)
Weight: 0.002 ounce,0.07 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
MDD Catalog Number
Peak Power Dissipation at T_A=50^OC,
Derate above 50 ^OC (Note 1)
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2)
Operating and Storage Temperature Range
SYMBOLS
P_D
I_FSM
T_J, T_STG
VALUE
1.0
6.67
10.0
-55 to + 150
Notes: 1. Mounted on 5.0mm² (0.013mm thick) land areas.
2. Measured on 8.3ms Single Half Sine-wave or Equivalent Square Wave,
Duty Cycle=4 Pulses Per Minute Maximum.
UNITS
Watts
mW/ ^OC
Amps
O_C