E36D501HPN Datasheet, PDF (2/13 Pages) United Chemi-Con, Inc. – Large Can

U36D Series
U36D Specifications - Screw Terminals
Item
Category Temperature Range
Rated Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
Rated Ripple Current Multipliers
Characteristics
؁40 to ؀85؇C
6.3 to 550VDC
68␮F to 2.2F at ؀25؇C, 120Hz
ؓ20% ( M ) at ؀25؇C, 120Hz
I ؄ 0.02CV (␮A ) or 5mA, whichever is smaller, after 5 minutes at ؀25؇C.
Where I = Max. leakage current (␮A ), C = Nominal capacitance (␮F ) and V = Rated voltage ( V )
Ambient Temperature (؇C )
؀ ≤55؇C
2.39
؀65؇C
2.22
؀75؇C
1.67
؀85؇C
1.00
Frequency (Hz )
50Hz
0.8
120Hz
1.0
300Hz
1.1
1kHz
1.3
3kHz
1.4
Endurance
(Load Life)
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to ؀25؇C after
subjecting them to DC voltage for 2,000 hours at ؀85؇C with the rated ripple current applied.
The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of
the capacitors.
Capacitance change: ≤ 20% from initial measurement
ESR change
: ≤ 300% of initial specified limit
Leakage current : ≤ initial specified limit
The following specifications shall be satisfied when the capacitors are restored to ؀25؇C after
exposing them for 500 hours at ؀85؇C without voltage applied. The rated voltage shall be
applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than
48 hours before the measurements.
Capacitance change: ≤ 20% from initial measurement
ESR change
: ≤ 300% of initial specified limit
Leakage current : ≤ initial specified limit
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel [phone] Fax [phone] www.chemi-con.com 87