|
KVF101L474M43 Datasheet, PDF (1/3 Pages) United Chemi-Con, Inc. – MULTILAYER CERAMIC CHIP CAPACITORS | |||
|
MULTILAYER CERAMIC CHIP CAPACITORS
,7'4FSJFT
RoHS "&$
Compliant 2
Temperature cycle : 1000 cycles
ËFEATURES
1. Temperature range : -55 to +150Ë
2. TemperatureDIBSBDUFSJTUJDT9-
3. Exellent noise absorption.
4. Automotive grade (AEC-Q200)
ËAPPLICATIONS
1. Noise filter for automotive equipment (ECU etc.)
2. Equipment used in a high temperature environment
ËCONSTRUCTION
Ceramic Dielectric
Termination
(Tin Plating)
ËRATINGS
1. Category Temperature Range
2. Rated Voltage Range
3. Rated Capacitance Range
4. Rated Capacitance Tolerance
5. Temperature Characteristics
6. Rated Ripple Current
Internal Electrode
-55Ê+150â
25, 50, 100 Vdc
0.033Ê15μF
M ±20Ë
X8L
See No.5 on the following table
ËSPECIFICATIONS
No.
Items
1 Withstand Voltage
2 Insulation Resistance
3 Rated Capacitance
4 Dissipation Factor
5 Rated Ripple Current
Specification
No abnormality.
100/CR(MÐ) or 4000(MÐ)
whichever is less.
Within specified tolerance.
5.0% maximum.
Size code 31 32 43 55
Arms 0.3 0.5 1.0 2.0
Test Condition
250% of rated voltage shall be applied for 5 seconds.
(Only 250Vdc product : 475V)
Rated voltage shall be applied for 60ʶ5 seconds at
temperature 25ʶ2Ë.
Temperature
Frequency
Voltage
CRʽ10ÂF
CR>10ÂF
25ʶ2Ë
1ʶ0.1kHz
120ʶ12Hz
1ʶ0.2Vrms
0.5ʶ0.2Vrms
10kHzÊ1MHz (sine curve)
Ripple voltage Vp shall be less than
the rated voltage.
The surface temperature MLCC must not exceed the
maximum category temperature when the ripple current
is applied.
As customer requirement, Chemi-Con has submits the test results according to AEC-Q200 for Multilayer ceramic
capacitors. Please contact us for more information.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
18
CAT. No. E1002V
|
▷ |