|
HHXC350ARA220 Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS | |||
|
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount
HXC New!
Series
ã»High reliability and high voltage are realized by hybrid electrolyte
ã»Endurance with ripple current : 4,000 hours at 125â
ã»Rated voltage range : 16 to 63Vdc, Capacitance range : 6.8 to 470μF
ã»For high temperature and high reliability applications.
(Automotive equipment, Base station equipment, etc.)
ã»RoHS Compliant
ã»Halogen Free
ã»AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
HXC
Higher temperature
HXD P74
âSPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanÐ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Bias Humidity Test
Characteristics
-55 to +125â
16 to 63Vdc
±20% (M)
I=0.01CV
Where, I : Max. leakage current (μAï¼, C: Nominal capacitance(μFï¼, V : Rated voltage(V)
Rated voltage(Vdc)
16V 25V 35V 50V 63V
tanδï¼Max.)
0.16 0.14 0.12 0.10 0.08
(at 20â, 120Hz)
(at 20â after 2 minutes)
(at 20â, 120Hz)
Z(-25â)/Z(+20â)â¦1.5
Z(-55â)/Z(+20â)â¦2.0
(at 100kHz)
The following speciï¬cations shall be satisï¬ed when the capacitors are restored to 20â after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours at 125â.
Capacitance change
â¦Â±30% of the initial value
D.F. (tanδ)
⦠200% of the initial speciï¬ed value
ESR
⦠200% of the initial speciï¬ed value
Leakage current
⦠The initial speciï¬ed value
The following speciï¬cations shall be satisï¬ed when the capacitors are restored to 20â after exposing them for 1,000 hours at 125â
without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS
C 5101-4.
Capacitance change
â¦Â±30% of the initial value
D.F. (tanδ)
⦠200% of the initial speciï¬ed value
ESR
⦠200% of the initial speciï¬ed value
Leakage current
⦠The initial speciï¬ed value
The following speciï¬cations shall be satisï¬ed when the capacitors are restored to 20â after subjecting them to the DC rated voltage
at 85â, 85% RH for 2,000 hours.
Appearance
No signiï¬cant damage
Capacitance change
⦠±30ï¼
of the initial value
D.F.ï¼tanδï¼
⦠200ï¼
of the initial speciï¬ed value
ESR
⦠200ï¼
of the initial speciï¬ed value
Leakage current
⦠The initial speciï¬ed value
âDIMENSIONS [mm]
â Terminal Code : A
â Size code : E61 to JA0
Vent for JA0
W
0.3max.
A±0.2
L±0.3 (Note)
Note : L±0.5 for HA0 and JA0
â Terminal Code : G(Vibration resistant structure)
â Size code : HA0 and JA0
Vent for JA0
0.3max.
W
Size Code ÐD L A B C
W
P
E61
5 5.8 5.3 5.3 5.9 0.5 to 0.8 1.4
F61
6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9
F80
6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0
10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
L±0.5
A±0.2
: Dummy terminals
âPART NUMBERING SYSTEM
1 234 567
H HXC
8 9 10 11 12 13 14 15 16 17 18
RA
M
G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470, 100µF:101)
Taping code
Terminal code
Voltage code (ex. 35V:350, 50V:500)
Series code
Category
Please refer to "Product code guide (conductive polymer hybrid type)"
âMARKING
EX) 35V270µF
47E
270
V HC
âRated voltage symbol
Rated voltage (Vdc)
16
25
35
50
63
Symbol
C
E
V
H
J
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
72
CAT. No. E1001Q
|
▷ |