HHXB350ARA470 Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS

CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount
HXBSeries
・High reliability and high voltage are realized by hybrid electrolyte
・Endurance with ripple current : 5,000 hours at 105℃
・For high reliability applications.
(Automotive equipment, Base station equipment, etc.)
・RoHS Compliant
・Halogen Free
・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
HXA P76
Higher temperature
HXB
◆SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Characteristics
-55 to +105℃
16 to 80Vdc
±20% (M)
I=0.01CV
Where, I : Max. leakage current (μA）, C: Nominal capacitance(μF）, V : Rated voltage(V)
Rated voltage(Vdc)
16V 25V 35V 50V 63V 80V
tanδ（Max.)
0.16 0.14 0.12 0.10 0.08 0.08
(at 20℃, 120Hz)
(at 20℃ after 2 minutes)
(at 20℃, 120Hz)
Z(-25℃)/Z(+20℃)≦1.5
Z(-55℃)/Z(+20℃)≦2.0
(at 100kHz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105 ℃.
Capacitance change
≦±30% of the initial value
D.F. (tanδ)
≦ 200% of the initial specified value
ESR
≦ 200% of the initial specified value
Leakage current
≦ The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105 ℃
without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS
C 5101-4.
Capacitance change
≦±30% of the initial value
D.F. (tanδ)
≦ 200% of the initial specified value
ESR
≦ 200% of the initial specified value
Leakage current
≦ The initial specified value
◆DIMENSIONS [mm]
● Terminal Code : A
● Size code : F61 to JA0
Vent for JA0
W
● Terminal Code : G(Vibration resistant structure)
● Size code : HA0 and JA0
Vent for JA0
0.3max.
W
Size Code φD L A B C
W
P
F61
6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9
F80
6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0
10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
0.3max.
A±0.2
L±0.3 (Note)
Note : L±0.5 for HA0 and JA0
L±0.5
A±0.2
: Dummy terminals
◆PART NUMBERING SYSTEM
1 234 567
H HXB
8 9 10 11 12 13 14 15 16 17 18
RA
M
G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470, 100µF:101)
Taping code
Terminal code
Voltage code (ex. 35V:350, 50V:500)
Series code
Category
Please refer to "Product code guide (conductive polymer hybrid type)"
◆MARKING
EX) 35V47µF
26A
47
V ^HB
●Rated voltage symbol
Rated voltage (Vdc)
16
25
35
50
63
80
Symbol
C
E
V
H
J
K
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
78
CAT. No. E1001Q