GXL Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – Long life, 125℃

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Long life, 125℃
GXLSeries
・Long-Life version of GXE series
・For automobile modules and other high temperature applications
・Endurance with ripple current : 5,000 hours at 125℃
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
GXL
Longer life
GXE P189
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +125℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
10 to 50Vdc
±20% (M)
(at 20℃, 120Hz)
I=0.03CV or 4µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃, 1 minute)
Rated voltage (Vdc)
10V 16V 25V 35V 50V
tanδ (Max.)
0.20 0.16 0.14 0.12 0.10
(at 20℃, 120Hz)
Rated voltage (Vdc)
10V 16V 25V 35V 50V
Z(-25℃)/Z(+20℃)
3
2
2
2
2
Z(-40℃)/Z(+20℃)
6
4
4
4
4
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 125℃.
Capacitance change ≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value
Leakage current
≦The initial specified value
◆DIMENSIONS [mm]
●Terminal Code : E
Sleeve (PET : Orange)
Vent
L'
15min.
4min.
(φ10)
Gas escape end seal
φD
10
φd
0.6
F
5.0
φD' φD+0.5max.
L' L+1.5max.
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E GXL AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 100µF:101, 1,000µF:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 10V:100, 50V:500)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
191
CAT. No. E1001N