ESRG4R0E Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low profile, 85C
@Low profile : F4B7mm to F18B25mm
@Endurance : 1,000 to 2,000 hours at 85C
@Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
@RoHS Compliant
SRG
Downsized
Downsized
Low profile
SRA SMG
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +85C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
4 to 50Vdc
P20% (M)
(at 20C, 120Hz)
I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 2 minutes)
Rated voltage (Vdc)
4V 6.3V 10V 16V 25V 35V 50V
tanE (Max.)
0.38 0.28 0.24 0.20 0.16 0.14 0.12
When nominal capacitance exceeds 1,000MF, add 0.03 to the value above for each 1,000MF increase.
(at 20C, 120Hz)
Rated voltage (Vdc)
4V 6.3V 10V 16V 25V 35V 50V
Z(-25C)/Z(+20C)
6
5
4
3
2
2
2
Z(-40C)/Z(+20C)
12 12 10 8 5 4 3
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2,000 hours
(1,000 hours for F8 and smaller) at 85C.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 85C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET : Black)
or
L'
15min.
4min.
Vent
(F10 and larger)
fD
4
7L 0.45
fd _{]9L -}
F
1.5
fD'
L'
5 6.3 8 10 & 12.5 16 & 18
0.45 0.45 0.45 -
-
0.5 0.5 0.6
0.6
0.8
2.0 2.5 3.5
5.0
7.5
FD+0.5max.
L+1.5max. (7L : L+1.0max.)
(F4 to F10)
Gas escape end seal
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E SRG AAA E AA AAA M AAA D
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 100MF:101, 2,200MF:222)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 35V:350, 50V:500)
Series code
Category
Please refer to "Product code guide (radial lead type)"
(F12.5 to F18)
(1/2)
CAT. No. E1001K