EPAG201ESS820MJ30S Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
New!
200 to 450Vdc, Downsized, 105C
@Downsize, high ripple design (F10 to 18)
@Rated voltage range : 200 to 450Vdc., Capacitance range : 18 to 560MF
@Endurance with ripple current : 105C 2000 hours
@Ideal for low profile power supply application
@Non solvent-proof type
@Pb-free design
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +105C (200, 400Vdc) -25 to+105C (420, 450Vdc)}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanE)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
200 to 450Vdc
P20% (M)
(at 20C, 120Hz)
After 1 minute
After 5 minutes
CV[1000
I=0.1CV+40
I=0.03CV+15
CV>1000
I=0.04CV+100
I=0.02CV+25
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C)
Rated voltage (Vdc)
200V 400V 420V 450V
tanE (Max.)
0.12
0.15
0.20
0.20
(at 20C, 120Hz)
Rated voltage (Vdc)
200V 400V 420V 450V
Z(-25C)/Z(+20C)
3
5
6
6
Z(-40C)/Z(+20C)
6
6
-
-
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 2000 hours at 105C.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C
without voltage applied.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[500% of the initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET)
Vent
L'
Sleeve (PET)
15min.
4min.
(F10)
(F12.5)
Gas escape end seal
fD
10 12.5 14.5 16 18
fd
0.6 0.6 0.8 0.8 0.8
F
5.0 5.0 7.5 7.5 7.5
fD'
FD+0.5 max.
L'
L+2.0 max.
Vent
L'
15min.
4min.
(F14.5 to F18)
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E PAG AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 22MF:220,100MF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 200V:201,450V:451)
Series code
Category
Please refer to "A guide to global code (radial lead type)"
(1/2)
CAT. No. E1001E