|
EMZK250ADA Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – Low impedance, 5000-hours-life, 105℃ | |||
|
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 5000-hours-life, 105â
MZK AIchipTM-
Series
ã»Endurance : 5,000 hours at 105â
ã»Low impedance
ã»Rated voltage range : 6.3 to 35V
ã»Nominal capacitance range : 10 to 150µF
ã»Suitable for high reliability products
ã»Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
ã»RoHS Compliant
Longer life
MVY
P76
MZK
âSPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-25 to +105â
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
6.3 to 35Vdc
±20%(M)
(at 20â,120Hz)
I=0.01CV or 3µA, whichever is greater
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20â, after 2 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V
tanδ (Max.)
0.32 0.28 0.26 0.16 0.14
(at 20â,120Hz)
Rated voltage(Vdc)
6.3V 10V 16V 25V 35V
Z(-10â)/Z(+20â)
43222
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20â after the rated voltage is applied for 5,000 hours
at 105â.
Capacitance change â¦Â±30% of the initial value
D.F. (tanδ)
â¦300% of the initial specified value
Leakage current
â¦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20â after exposing them for 1,000 hours at 105â without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change â¦Â±30% of the initial value
D.F. (tanδ)
â¦300% of the initial specified value
Leakage current
â¦The initial specified value
âDIMENSIONS [mm]
âTerminal Code : A
W
0.3max.
L±0.3
A±0.2
Size code D L A B C
W
P
E61
5 5.8 5.3 5.3 5.9 0.5 to 0.8 1.4
F61
6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9
âPART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E MZK AAA A DA AAA M AAA G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470,100µF:101)
Taping code
Terminal code
Voltage code (ex. 6.3V:6R3,10V:100,35V:350)
Series code
Category
Please refer to "Product code guide (surface mount type)"
âMARKING
EX) 35V47µF
9C
47
V ZK
âRated voltage symbol
Rated voltage (Vdc) 6.3 10 16 25 35
Symbol
j ACEV
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
82
CAT. No. E1001N
|
▷ |