EMVY250ADA Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – Low impedance, 105℃

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, 105℃
MVY AIchip^TM-
Series
・Endurance : 1,000 to 5,000 hours at 105℃
・Low impedance
・For digital equipment, especially DC-DC converters
・Solvent resistant type except 80 & 100Vdc (see PRECAUTIONS AND GUIDELINES)
・Vibration resistant structure
・RoHS Compliant
MZA P74
Lower Z
MVY
Longer life
Lower Z
MVE P70
MLA P84
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-55 to +105℃ (6.3 to 63Vdc) -40 to +105℃ (80 & 100Vdc)}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
6.3 to 100Vdc
±20% (M)
(at 20℃, 120Hz)
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃ after 2 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V When nominal capacitance exceeds
D55 to F80 0.24 0.20 0.16 0.14 0.12 0.12 - - - 1,000µF, add 0.02 to the value above
tanδ (Max.)
HA0 & JA0 0.28 0.24 0.20 0.16 0.14 0.12 - - - for each 1,000µF increase.
KE0 to MN0 0.26 0.22 0.18 0.16 0.14 0.12 0.14 0.10 0.10
(at 20℃, 120Hz)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V
D55 to JA0 3
2
2
2
2
2 - --
Z(-40℃)/Z(+20℃)
KE0 to MN0 10 8 6
4333
33
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for specified
time at 105℃.
Time
D55 to F80 : 1,000 hours
HA0 & JA0 : 2,000 hours
KE0 to MN0 : 5,000 hours
Rated voltage
6.3Vdc (D55 to JA0)
6.3 to 100Vdc
Capacitance change ≦±30% of the initial value
≦±20% of the initial value
D.F. (tanδ)
≦300% of the initial specified value ≦200% of the initial specified value
Leakage current
≦The initial specified value
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Rated voltage
6.3Vdc (D55 to JA0)
6.3 to 100Vdc
Capacitance change ≦±30% of the initial value
≦±20% of the initial value
D.F. (tanδ)
≦300% of the initial specified value ≦200% of the initial specified value
Leakage current
≦The initial specified value
≦The initial specified value
◆DIMENSIONS [mm]
● Terminal Code : A
● Terminal Code : G(Vibration resistant structure)
● Size code : D55 to MN0
Vent
(Except D55 to HA0)
W
0.3max.
A±0.2
L±0.3 (Note)
Note : L±0.5 for HA0 to MN0
◆PART NUMBERING SYSTEM
● Size code : HA0 to MN0
Vent
0.3max.
W
(Except HA0)
L±0.5
A±0.2
: Dummy terminals
Size code D L A B C
W
P
D55
4 5.2 4.3 4.3 5.1 0.5 to 0.8 1.0
E55
5 5.2 5.3 5.3 5.9 0.5 to 0.8 1.4
F55 6.3 5.2 6.6 6.6 7.2 0.5 to 0.8 1.9
F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9
F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
KE0 12.5 13.5 13.0 13.0 13.7 1.0 to 1.3 4.2
KG5 12.5 16.0 13.0 13.0 13.7 1.0 to 1.3 4.2
LH0 16 16.5 17.0 17.0 18.0 1.0 to 1.3 6.5
LN0 16 21.5 17.0 17.0 18.0 1.0 to 1.3 6.5
MH0 18 16.5 19.0 19.0 20.0 1.0 to 1.3 6.5
MN0 18 21.5 19.0 19.0 20.0 1.0 to 1.3 6.5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E MV Y AAA A DA AAA M AAA G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 4.7µF:4R7,10µF:100)
Taping·Tray code
Terminal code (A, G)
Voltage code (ex. 6.3V:6R3,10V:100,50V:500)
Series code
Category
◆MARKING
D55 to JA0
EX) 6.3V100µF
7hY
100
6.3V
KE0 to MN0
EX) 16V1,000µF
0V
MVY
1000
16V
Please refer to "Product code guide (surface mount type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
76
CAT. No. E1001N