EMVL100ADA Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – 3000 to 5000-hours-life, 105℃

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS 3000 to 5000-hours-life, 105℃
MVL AIchip^TM-
Series
・Endurance : 3,000 to 5,000 hours at 105℃
・Suitable for applications requiring long life such as continuously operating
equipment, industrial applications, etc
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
MVL
Longer life
MVJ P93
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +105℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. impedance Ratio)
Endurance
Shelf Life
6.3 to 50Vdc
±20%(M)
(at 20℃,120Hz)
I=0.03CV or 4µA, whichever is greater
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃, after 2 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V
Max. tanδ
0.28 0.24 0.20 0.16 0.13 0.12
(at 20℃,120Hz)
Rated voltage(Vdc)
6.3V 10V 16V 25V 35V 50V
Z(-25℃)/Z(+20℃)
4
3
2
2
2
2
Z(-40℃)/Z(+20℃)
10 7
5
3
3
3
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for
specified time at 105℃.
Time
D60 to F80：3,000 hours
HA0 & JA0：5,000 hours
Capacitance change ≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value
Leakage current
≦The initial specified value
◆DIMENSIONS [mm]
●Terminal Code : A
Vent for JA0
W
0.3max.
A±0.2
L±0.3 (Note)
Note : L±0.5 for HA0 and JA0
Size code D L A B C
W
P
D60
4 5.7 4.3 4.3 5.1 0.5 to 0.8 1.0
E60
5 5.7 5.3 5.3 5.9 0.5 to 0.8 1.4
F60 6.3 5.7 6.6 6.6 7.2 0.5 to 0.8 1.9
F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E MV L AAA A DA AAA M AAA G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 4.7µF:4R7,10µF:100)
Taping code
Terminal code
Voltage code (ex. 6.3V:6R3,10V:100,50V:500)
Series code
Category
Please refer to "Product code guide (surface mount type)"
◆MARKING
EX) 16V47µF
9hL
47
16V
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
91
CAT. No. E1001N