EMVK6R3ADA220MD55G Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
Standard, 105C
@Endurance : 105C 1000 to 2000 hours
@Suitable to fit for downsized equipment
@Solvent-proof type (see PRECAUTIONS AND GUIDELINES)
@Pb-free design
MVY
MVH
low Z
125C
MVK
MVL
MVJ
longer life
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +105C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
6.3 to 50Vdc
P20% (M)
(at 20C, 120Hz)
I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 2 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V
tanE (Max.)
D55 to F55 0.30 0.24 0.20 0.16 0.14 0.12
H63 to JA0 0.40 0.30 0.26 0.16 0.14 0.12
(at 20C,120Hz)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V
Z(-25C)/Z(+20C)
432222
Z(-40C)/Z(+20C)
10 8 6 4 3 3
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for the specified
period of time at 105C.
Case code
D55 to F55
H63 to JA0
Time
1000hours
2000hours
Capacitance change [P30% of the initial value
[P20% of the initial value
D.F. (tanE)
[300% of the initial specified value [200% of the initial specified value
Leakage current
[The initial specified value
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for the specified time at 105C
without voltage applied.
Case code
D55 to F55
H63 to JA0
Time
500hours
1000hours
Capacitance change [P25% of the initial value
[P20% of the initial value
D.F. (tanE)
[200% of the initial specified value [200% of the initial specified value
Leakage current
[The initial specified value
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : A _W
0.3max.
LP0.3 (Note)
Note : LP0.5 for H63 to JA0
AP0.2
Size code D L A B C
W
P
D55
4 5.2 4.3 4.3 5.1 0.5 to 0.8 1.0
E55
5 5.2 5.3 5.3 5.9 0.5 to 0.8 1.4
F55 6.3 5.2 6.6 6.6 7.2 0.5 to 0.8 1.9
H63
8 6.3 8.3 8.3 9.0 0.5 to 0.8 2.3
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
?MARKING
EX) 6.3V100MF
7hK
100
6.3V
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E MVK AAA A DA AAA M AAA G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 4.7MF:4R7,10MF:100)
Taping code
Terminal code
Voltage code (ex. 6.3V:6R3,10V:100,50V:500)
Series code
Category
Please refer to "A guide to global code (surface mount type)"
(1/2)
CAT. No. E1001E