EMVJ6R3ADA Datasheet, PDF (1/1 Pages) United Chemi-Con, Inc. – 2000-hours-life, 105℃

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
2000-hours-life, 105℃
MVJ AIchip^TM-
Series
・Endurance : 2,000 hours at 105℃
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
◆SPECIFICATIONS
MVL P91
longer life
MVJ
longer life
MVE P70
Items
Characteristics
Category
Temperature Range
-40 to +105℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
6.3 to 50Vdc
±20% (M)
(at 20℃, 120Hz)
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃ after 2 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V
tanδ (Max.)
0.30 0.24 0.20 0.16 0.14 0.12
(at 20℃, 120Hz)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V
Z(-25℃)/Z(+20℃)
432222
Z(-40℃)/Z(+20℃)
12 8 6 4 3 3
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours
at 105℃.
Rated voltage
6.3Vdc
10 & 16Vdc
25 to 50Vdc
Capacitance change ≦±30% of the initial value
≦±25% of the initial value
≦±20% of the initial value
D.F. (tanδ)
≦300% of the initial specified value ≦300% of the initial specified value ≦200% of the initial specified value
Leakage current
≦The initial specified value
≦The initial specified value
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Rated voltage
6.3Vdc
10 & 16Vdc
25 to 50Vdc
Capacitance change ≦±30% of the initial value
≦±25% of the initial value
≦±20% of the initial value
D.F. (tanδ)
≦300% of the initial specified value ≦300% of the initial specified value ≦200% of the initial specified value
Leakage current
≦The initial specified value
≦The initial specified value
≦The initial specified value
◆DIMENSIONS [mm]
●Terminal Code : A
W
0.3max.
L±0.3
A±0.2
Size code D L A B C
W
P
D60
4 5.7 4.3 4.3 5.1 0.5 to 0.8 1.0
E60
5 5.7 5.3 5.3 5.9 0.5 to 0.8 1.4
F60 6.3 5.7 6.6 6.6 7.2 0.5 to 0.8 1.9
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E MV J AAA A DA AAA M AAA G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 4.7µF:4R7,10µF:100)
Taping code
Terminal code
Voltage code (ex. 6.3V:6R3,10V:100,50V:500)
Series code
Category
Please refer to "Product code guide (surface mount type)"
◆MARKING
EX) 6.3V100µF
7hJ
100
6.3V
◆STANDARD RATINGS
WV Cap
(Vdc) (µF)
22
6.3 47
100
10 33
10
16 22
47
25 33
Size code
D60
E60
F60
E60
D60
E60
F60
F60
Rated ripple
tanδ
current
(mArms/
105℃,120Hz)
Part No.
0.30
21 EMVJ6R3ADA220MD60G
0.30
36 EMVJ6R3ADA470ME60G
0.30
56 EMVJ6R3ADA101MF60G
0.24
34 EMVJ100ADA330ME60G
0.20
16 EMVJ160ADA100MD60G
0.20
30 EMVJ160ADA220ME60G
0.20
48 EMVJ160ADA470MF60G
0.16
45 EMVJ250ADA330MF60G
WV Cap
(Vdc) (µF)
4.7
35 10
22
1.0
2.2
50 3.3
4.7
10
Size code
D60
E60
F60
D60
D60
D60
E60
F60
Rated ripple
tanδ
current
(mArms/
105℃,120Hz)
Part No.
0.14 15
0.14 25
0.14 40
0.12
5.6
0.12 10
0.12 14
0.12 19
0.12 29
EMVJ350ADA4R7MD60G
EMVJ350ADA100ME60G
EMVJ350ADA220MF60G
EMVJ500ADA1R0MD60G
EMVJ500ADA2R2MD60G
EMVJ500ADA3R3MD60G
EMVJ500ADA4R7ME60G
EMVJ500ADA100MF60G
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Frequency(Hz)
120
Capacitance(μF)
1.0
1.00
2.2 to 10
1.00
22 to 100
1.00
1k
1.50
1.30
1.05
10k
1.75
1.40
1.08
100k
1.80
1.50
1.08
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
93
CAT. No. E1001N