EMVH100ADA101MF80G Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
High heat resistance, 125C
MVH
@Endurance : 125C 1000 to 5000 hours
@Suitable to fit for automotive equipment
@Solvent-proof type (10 to 50V) (see PRECAUTIONS AND GUIDELINES)
@Pb-free design
125C
size extended
MVK
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +125C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
10 to 450Vdc
P20% (M)
(at 20C, 120Hz)
10 to 100Vdc
160 to 450Vdc
I=0.03CV or 4MA, whichever is greater.
I=0.04CV+100max
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 2 minutes)
Rated voltage (Vdc)
10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 & 450V
tanE (Max.) ^{F60 to JA0}
0.24 0.20 0.16 0.14 0.14 0.18 0.18
-
-
KE0 to MN0
0.22 0.18 0.16 0.14 0.12 0.14 0.10
0.20
0.24
When nominal capacitance exceeds 1000MF, add 0.02 to the value above for each 1000MF increase.
(at 20C, 120Hz)
Rated voltage (Vdc)
10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 & 450V
Z(-25C)/Z(+20C) 4 3 2 2 2 2 2
-
-
F60 to JA0 _{Z(-40C)/Z(+20C) 10}
8
6
4
4
4
4
-
-
KE0 to MN0 ^{Z(-25C)/Z(+20C) 4}
3
2
2
2
2
2
3
6
Z(-40C)/Z(+20C) 8 6 4 3 3 3 3
6
10
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for the specified
time at 125C.
F60 to H63 (10 to 100Vdc) : 1000hours
Time
HA0 to JA0 (10 to 100Vdc) : 2000hours
KE0 to MN0 (10 to 100Vdc) : 5000hours
KE0 to MN0 (160 to 450Vdc) : 2000hours
Capacitance change [P30% of the initial value
D.F. (tanE)
[300% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours (500 hours
for 350 to 450WV) at 125C without voltage applied.
Rated voltage(Vdc)
10 to 50Vdc
63 to 450Vdc
Capacitance change [P30% of the initial value
[P30% of the initial value
D.F. (tanE)
[300% of the initial specified value [300% of the initial specified value
Leakage current
[The initial specified value
[500% of the initial specified value
?DIMENSIONS [mm]
@Terminal Code : A
@Size code : F60 to KG5
W
0.3max.
AP0.2
LP0.5 (Note)
Note : LP0.3 for F60 and F80
@Terminal Code : G
@Size code : LH0 to MN0
0.3max.
W
Size code D L A B C
W
P
F60 6.3 5.7 6.6 6.6 7.2 0.5 to 0.8 1.9
F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
H63
8 6.3 8.3 8.3 9.0 0.5 to 0.8 2.3
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0
10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
KE0 12.5 13.5 13.0 13.0 13.7 1.0 to 1.3 4.2
KG5 12.5 16.0 13.0 13.0 13.7 1.0 to 1.3 4.2
LH0
16 16.5 17.0 17.0 18.0 1.0 to 1.3 6.5
LN0
16 21.5 17.0 17.0 18.0 1.0 to 1.3 6.5
MH0 18 16.5 19.0 19.0 20.0 1.0 to 1.3 6.5
MN0 18 21.5 19.0 19.0 20.0 1.0 to 1.3 6.5
?MARKING
F60 to JA0
EX) 35V47MF
74H
47
35V
KE0 to MN0
EX) 16V1000MF
0V
MVH
1000
16V
LP0.5
AP0.2
: Dummy terminals
(1/2)
CAT. No. E1001E