EMVE6R3ADA220MD55G Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
Downsized, 105C
@Rated voltage range : 6.3 to 450V, capacitance range : 0.47 to 6800MF
@Endurance : 1000 to 2000 hours at 105C
@Case size range : F4B5.2L to F18B21.5L
@Solvent-proof type except 100 to 450Vdc (see PRECAUTIONS AND GUIDELINES)
@Pb-free design
MVE
downsized
size extended
MVK
?SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Characteristics
-40 to +105C
6.3 to 450Vdc
P20%(M)
(20C, 120Hz)
Rated voltage(Vdc)
6.3 to 100V
160 to 450V
D55 to JA0
I=0.01CV or 3MA, whichever is greater (2 minutes)
-
KE0 to MN0
I=0.03CV or 4MA, whichever is greater (1 minute)
I=0.04CV+100MA (1minute)
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(20C)
See STANDARD RATINGS
(20C, 120Hz)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 to 450V
D55 to JA0
Z(-25C)/Z(+20C) 4
3
2
2
2
2
2
3
-
-
Z(-40C)/Z(+20C) 12 8
6
4
3
3
3
4
-
-
KE0 to MN0 ^{Z(-25C)/Z(+20C) 5}
4
3
2
2
2
2
2
3
6
Z(-40C)/Z(+20C) 10 8
6
4
3
3
3
3
6
10
(120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for the specified
period of time at 105C.
Size code
D55 to F80
HA0 to MN0
Time
1000 hours
2000 hours
Capacitance change [P30% of the initial value
[P20% of the initial value
D.F. (tanE)
[300% of the initial specified value
[200% of the initial specified value
Leakage current
[The initial specified value
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours (500 hours
for B55 to F80 size) at 105C without voltage applied.
Size code
D55 to F80
HA0 to MN0
Capacitance change [P25% of the initial value
[P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
[200% of the initial specified value
Leakage current
[The initial specified value
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : A
@Size code : D55 to KG5
W
0.3max.
LP0.3 (Note)
Note : LP0.5 for HA0 to KG5
AP0.2
@Terminal Code : G
@Size code : LH0 to MN0
0.3max.
W
LP0.5
AP0.2
: Dummy terminals
Size code D L A B C
W
P
D55
4 5.2 4.3 4.3 5.1 0.5 to 0.8 1.0
E55
5 5.2 5.3 5.3 5.9 0.5 to 0.8 1.4
F55 6.3 5.2 6.6 6.6 7.2 0.5 to 0.8 1.9
F60 6.3 5.7 6.6 6.6 7.2 0.5 to 0.8 1.9
F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0
10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
KE0 12.5 13.5 13.0 13.0 13.7 1.0 to 1.3 4.2
KG5 12.5 16.0 13.0 13.0 13.7 1.0 to 1.3 4.2
LH0 16 16.5 17.0 17.0 18.0 1.0 to 1.3 6.5
LN0 16 21.5 17.0 17.0 18.0 1.0 to 1.3 6.5
MH0 18 16.5 19.0 19.0 20.0 1.0 to 1.3 6.5
MN0 18 21.5 19.0 19.0 20.0 1.0 to 1.3 6.5
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E MVE AAA A AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 0.47MF:R47,100MF:101)
Taping·Tray code
Terminal code (A, G)
Voltage code (ex. 6.3V:6R3,100V:101,450V:451)
Series code
Category
Please refer to "A guide to global code (surface mount type)"
?MARKING
D55 to JA0
Ex)16V22MF
7hE
22
16V
KE0 to MN0
Ex)25V1000MF
0V
MVE
1000
25V
(1/2)
CAT. No. E1001E