EMVA350ADA Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – Standard, 85℃

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
Standard, 85℃
MVA Alchip^TM-
Series
・φ4 through φ18 case sizes are fully lined up
・Endurance : 2,000 hours at 85℃
・Suitable to fit for downsized equipment
・Solvent resistant type except 100 to 450Vdc (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
◆SPECIFICATIONS
MVA
MVE P70
105℃
Items
Category
Temperature Range
-40 to +85℃
Characteristics
Rated Voltage Range
Capacitance Tolerance
Leakage Current
4 to 450Vdc
±20% (M)
Rated voltage (Vdc)
4 to 100V
D55 to JA0 I=0.01CV or 3µA, whichever is greater.(after 2 minutes)
160 to 450V
-
(at 20℃, 120Hz)
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
KE0 to MN0 I=0.03CV or 4µA, whichever is greater.(after 1 minute)
I=0.04CV+100µA max.(after 1 minute)
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃)
Rated voltage (Vdc)
4V 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 & 450V
tanδ (Max.)
D55 to JA0 0.42 0.35 0.30 0.26 0.16 0.14 0.12 0.12 0.12 -
-
KE0 to MN0 - 0.38 0.34 0.30 0.26 0.22 0.18 0.14 0.10 0.20
0.25
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
(at 20℃, 120Hz)
Rated voltage (Vdc)
4V 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 & 450V
Z(-25℃)/Z(+20℃) 7
4
3
2
2
2
2
2
3
-
-
D55 to JA0
Z(-40℃)/Z(+20℃) 17 10 8
6
4
3
3
3
4
-
-
KE0 to MN0
Z(-25℃)/Z(+20℃) -
5
4
3
Z(-40℃)/Z(+20℃) - 12 10 8
2
5
2
4
2
3
2
3
2
3
3
6
6
10 (at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours
at 85℃.
Size code
D55 to JA0
D55 to JA0
KE0 to MN0
Rated voltage (Vdc)
4V & 6.3V
10 to 100V
6.3 to 450V
Capacitance change ≦±30% of the initial value
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value ≦200% of the initial specified value
Leakage current
≦The initial specified value
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Size code
Rated voltage
Capacitance change
D.F. (tanδ)
Leakage current
D55 to JA0
4V & 6.3V
≦±30% of the initial value
≦200% of the initial specified value
≦The initial specified value
D55 to JA0
KE0 to MN0
10 to 100V
6.3 to 450V
≦±20% of the initial value
≦200% of the initial specified value
≦The initial specified value
◆DIMENSIONS [mm]
●Terminal Code : A
●Size code : D55 to MN0
Vent
(Except D55 to HA0)
W
0.3max.
L±0.3(Note)
A±0.2
Note : L±0.5 for HA0 to MN0
◆MARKING
●_{Terminal Code : G (Vibration resistant structure)}
●Size code : LH0 to MN0
Size code D L A B C
W
P
Vent
0.3max.
W
D55
4 5.2 4.3 4.3 5.1 0.5 to 0.8 1.0
E55
5 5.2 5.3 5.3 5.9 0.5 to 0.8 1.4
F55 6.3 5.2 6.6 6.6 7.2 0.5 to 0.8 1.9
F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
KE0 12.5 13.5 13.0 13.0 13.7 1.0 to 1.3 4.2
L±0.5
A±0.2
KG5
LH0
12.5 16.0 13.0 13.0 13.7 1.0 to 1.3 4.2
16 16.5 17.0 17.0 18.0 1.0 to 1.3 6.5
LN0 16 21.5 17.0 17.0 18.0 1.0 to 1.3 6.5
: Dummy terminals
MH0
MN0
18 16.5 19.0 19.0 20.0 1.0 to 1.3 6.5
18 21.5 19.0 19.0 20.0 1.0 to 1.3 6.5
◆RATED RIPPLE CURRENT MULTIPLIERS
D55 to JA0
EX) 16V47µF
7hA
47
16V
KE0 to HN0
EX) 25V1,000µF
0V
MVA
1000
25V
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E MVA AAA A AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 1.0µF:1R0,100µF:101)
Taping·Tray code
Terminal code (A, G)
Voltage code (ex. 6.3V:6R3,100V:101,450V:451)
Series code
Category
・Frequency Multipliers
Size code
D55 to JA0
KE0 to MN0
Frequency(Hz)
Capacitance(μF)
1.0
2.2 to 10
22 to 1,500
4.7
10 to 68
100 to 1,000
2,200 to 10,000
120
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1k
1.50
1.30
1.05
1.75
1.50
1.30
1.05
10k
1.75
1.40
1.08
2.30
1.75
1.40
1.08
100k
1.80
1.50
1.08
2.50
1.80
1.50
1.08
The endurance of capacitors is reduced with internal
heating produced by ripple current at the rate of halving
the lifetime with every 5℃ rise.
When long life performance is required in actual use, the
rms ripple current has to be reduced.
Please refer to "Product code guide (surface mount type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
68
CAT. No. E1001N