EMV-4R0ADA220MB55G Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
Standard, 85C
@From 5.2L height
@Suitable to fit for downsized equipment
@Solvent-proof type (see PRECAUTIONS AND GUIDELINES)
@Pb-free design
MVA
MVS downsized
low profile
MV
MVK
105C
?SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Characteristics
-40 to +85C
4 to 63Vdc
P20% (M)
(at 20C, 120Hz)
I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 2 minutes)
Rated voltage (Vdc)
4V 6.3V 10V 16V 25V 35V 50V 63V
B55
0.42 0.27 0.23 0.19 0.16 0.14 0.12 -
tanE (Max.)
D55 to F60 0.42 0.24 0.20 0.16 0.14 0.12 0.10 0.12
H63 to JA0 - 0.40 0.30 0.26 0.16 0.14 0.12 0.12
(at 20C,120Hz)
Rated voltage (Vdc)
4V 6.3V 10V 16V 25V 35V 50V 63V
Z(-25C)/Z(+20C)
74322222
B55
17 10 8 6 4 3 3 -
Z(-40C)/Z(+20C)
D55 to F60 15 10 8 6 4 3 3 3
H63 to JA0 - 10 8 6 4 3 3 3
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours
(B55 size 1000 hours) at 85C.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 85C
without voltage applied.
Case code
B55
D55 to JA0
Capacitance change [P20% of the initial value
[P15% of the initial value
D.F. (tanE)
[200% of the initial specified value [150% of the initial specified value
Leakage current
[The initial specified value
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : A
W
0.3max.
LP0.3 (Note)
Note : LP0.5 for H63 to JA0
AP0.2
Size code D L A B C
W
P
B55
3 5.2 3.3 3.3 3.7 0.45 to 0.75 0.8
D55 & D60 4 *5.2 4.3 4.3 5.1 0.5 to 0.8 1.0
E55 & E60 5 *5.2 5.3 5.3 5.9 0.5 to 0.8 1.4
F55 & F60 6.3 *5.2 6.6 6.6 7.2 0.5 to 0.8 1.9
H63
8 6.3 8.3 8.3 9.0 0.5 to 0.8 2.3
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
* : L=5.7 for D60, E60 and F60.
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E MV- AAA A DA AAA M AAA G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 4.7MF:4R7,10MF:100)
Taping code
Terminal code
Voltage code (ex. 6.3V:6R3,10V:100,50V:500)
Series code
Category
Please refer to "A guide to global code (surface mount type)"
?MARKING
B55
EX)16V10MF
10
h16
D55 to JA0
EX)6.3V100MF
7h
100
6.3V
(1/2)
CAT. No. E1001E