|
EMHB800ARA Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – High heat resistance, 125℃ | |||
|
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
High heat resistance, 125â
MHB AIchipTM-
Upgrade!
Series
ã»ESR : Less than MVH
ã»Endurance : 1,500 to 3,000 hours at 125â
ã»Rated voltage range : 10 to 100V
ã»Nominal capacitance range : 47 to 3,300µF
ã»Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
ã»Vibration resistant structure
ã»RoHS Compliant
âSPECIFICATIONS
MHB
Lower ESR
MVH P94
Items
Characteristics
Category
Temperature Range -40 to +125â
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. impedance Ratio)
Endurance
10 to 100Vdc
±20%(M)
(at 20â, 120Hz)
HA0 & JA0 I=0.01CV
KE0 to MN0 I=0.03CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20â after 2 minutes)
Rated Voltage (Vdc)
10V 16V 25V 35V 50V 63V 80V 100V
tanδ(Max.) HA0 & JA0
KE0 to MN0
0.24 0.20 0.16 0.14 â
â
â
â
â â 0.14 0.12 0.10 0.10 0.08 0.08
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
(at 20â, 120Hz)
Rated Voltage (Vdc)
10V 16V 25V 35V 50V 63V 80V 100V
HA0 & JA0 Z(-25â)/Z(+20â)
Z(-40â)/Z(+20â)
3 2 2 2â âââ
4 3 3 3â âââ
Z(-25â)/Z(+20â)
KE0 to MN0 Z(-40â)/Z(+20â)
ââ222222
ââ444444
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20â after the rated voltage is applied
for 2,000. hours at 125â.
HA0 & JA0 Capacitance change â¦Â±30% of the initial value
D.F. (tanδ)
â¦300% of the initial specified value
Leakage current
â¦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20â after subjected to DC voltage with the
rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125â.
KE0 to MN0 Time
KE0 & KG5
ï¼1,500hours
LH0 & MH0
ï¼2,000hours
KN0 & LN0 & MN0ï¼3,000hours
Shelf Life
Capacitance change â¦Â±30% of the initial value
D.F. (tanδ)
â¦300% of the initial specified value
Leakage current
â¦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20â after exposing them for 1,000 hours at 125â without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change â¦Â±30% of the initial value
D.F. (tanδ)
â¦300% of the initial specified value
Leakage current
â¦The initial specified value
âDIMENSIONS [mm]
â Terminal Code : A
â Terminal Code : G(Vibration resistant structure)
â Size code : HA0 to MN0
Vent
(Except HA0)
W
0.3max.
L±0.5
A±0.2
âPART NUMBERING SYSTEM
â Size code : HA0 to MN0
Vent
0.3max.
W
(Except HA0)
L±0.5
A±0.2
Size code ÏD L A B C
W
P
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
KE0 12.5 13.5 13.0 13.0 13.7 1.0 to 1.3 4.2
KG5 12.5 16.0 13.0 13.0 13.7 1.0 to 1.3 4.2
KN0 12.5 21.5 13.0 13.0 13.7 1.0 to 1.3 4.2
LH0 16 16.5 17.0 17.0 18.0 1.0 to 1.3 6.5
LN0 16 21.5 17.0 17.0 18.0 1.0 to 1.3 6.5
MH0 18 16.5 19.0 19.0 20.0 1.0 to 1.3 6.5
MN0 18 21.5 19.0 19.0 20.0 1.0 to 1.3 6.5
: Dummy terminals
âMARKING
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E MHB AAA A DA AAA M AAA G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470,100µF:101)
Taping·Tray code
Terminal code (A, G)
Voltage code (ex. 35V:350,100V:101)
Series code
Category
Please refer to "Product code guide (surface mount type)"
HA0, JA0
EX) 16V220µF
5J
220
CHB
KE0 to MN0
EX) 35V1,000µF
2A
MHB
1000
35V
âRated voltage symbol (HA0, JA0)
Rated voltage (Vdc) 10 16 25 35
Symbol
A CE V
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
98
CAT. No. E1001N
|
▷ |