ELXV6R3ESS121MEB5D Datasheet, PDF (1/3 Pages) United Chemi-Con, Inc. – MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, 105C
LXZ
@Low impedance
@Endurance with ripple current: 105C 2000 to 5000 hours
@Solvent-proof type (see PRECAUTIONS AND GUIDELINES)
@Pb-free design
?SPECIFICATIONS
LXV
KME
lower Z
Items
Characteristics
Category
Temperature Range ^{-55 to +105C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
Endurance
Shelf Life
6.3 to 100Vdc
P20% (M)
(at 20C, 120Hz)
I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 2 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V
tanE (Max.)
0.22 0.19 0.16 0.14 0.12 0.10 0.10 0.09 0.08
When nominal capacitance exceeds 1000MF, add 0.02 to the value above for each 1000MF increase.
(at 20C, 120Hz)
Capacitance change DC (-55C /+20C) 0.7min.
Max. impedance ratio (-55C /+20C) 3max.(6.3Vdc : 4max.)
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for the specified period of time at 105C.
Time
F5 to 6.3 : 2000hours F8 & 10 : 3000hours F12.5 to F18 : 5000hours
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C
without voltage applied.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET)
L'
Vent
(Except F5 & F6.3)
15min.
4min.
(F5 to F10)
(F12.5 to F18)
Gas escaped end seal
fD 5 6.3 8 10 12.5 16 18
fd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
fD'
FD+0.5max.
L'
L+1.5max.
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E LXV AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 120MF:121,1500MF:152)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3,25V:250,100V:101)
Series code
Category
Please refer to "A guide to global code (radial lead type)"
(1/3)
CAT. No. E1001E