ELXM161VSN331MP25S Datasheet, PDF (1/3 Pages) United Chemi-Con, Inc. – LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS

LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105C
@Endurance with ripple current : 105C 7000 hours
@Non solvent-proof type
@Pb-free design
LXM
longer life
LXQ
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-25 to +105C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
160 to 450Vdc
P20% (M)
(at 20C, 120Hz)
I[3 CV
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 5 minutes)
Rated voltage (Vdc)
160 to 400V 420 & 450V
tanE (Max.)
0.15
0.20
(at 20C, 120Hz)
Rated voltage (Vdc)
160 to 400V 420 & 450V
Z(-25C)/Z(+20C)
4
8
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 7000 hours at 105C.
Capacitance change [P20% of the initial value
D.F. (tanE)
[250% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C
without voltage applied.
Capacitance change [P15% of the initial value
D.F. (tanE)
[150% of the initial specified value
Leakage current
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : VS (F22 to F35) : Standard
Sleeve (PET)
Negative mark
PC board pin-out
10
@Terminal Code : LI (F35)
Sleeve (PET)
Negative mark
PC board pin-out
2-1.2B6
Vent
LP2
*4.0_P0.5
*FD=35mm : 3.5P0.5mm
No plastic disk is the standard design
2-F2
Vent
LP2
4.5P1
5P0.5
14.2P1
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E L XM AAA VS N AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47MF:470,2200MF:222)
Dummy terminal code
Terminal code (VS, LI)
Voltage code (ex. 160V:161,315V:3B1,450V:451)
Series code
Category
Please refer to "A guide to global code (snap-in type)"
(1/3)
CAT. No. E1001E