ELXG100VSN682MP25S Datasheet, PDF (1/3 Pages) United Chemi-Con, Inc. – LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS

LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105C
@Endurance with ripple current : 105C 5000 hours
@Non solvent-proof type
@Pb-free design
LXG
longer life
KMH
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +105C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
10 to 100Vdc
(at 20C, 120Hz)
P20% (M)
I=0.02CV or 3mA, whichever is smaller.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 5 minutes)
Rated voltage (Vdc)
10V 16V 25V 35V 50V 63V 80 & 100V
tanE (Max.)
0.60 0.45 0.30 0.25 0.20 0.15 0.15
(at 20C, 120Hz)
Capacitance change : Capacitance at the lowest operating temperature shall not be less than 70% of the 20C value.
Rated voltage (Vdc)
10V 16V 25V 35V 50V 63V 80 & 100V
Z(-25C)/Z(+20C)
4
4
3
3
2
2
2
Z(-40C)/Z(+20C)
15 15 10 8
6
6
5
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with rated ripple
current is applied for 5000 hours at 105C.
Capacitance change [P25% of the initial value
D.F. (tanE)
[250% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 105C
without voltage applied.
Capacitance change [P20% of the initial value
D.F. (tanE)
[150% of the initial specified value
Leakage current
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : VS (F22 to F35) : Standard
Sleeve (PET)
Negative mark
PC board pin-out
10
@Terminal Code : LI (F35)
Sleeve (PET)
Negative mark
PC board pin-out
2-1.2B6
Vent
LP2
*4.0_P0.5
*FD=35mm : 3.5P0.5mm
No plastic disk is the standard design
2-F2
Vent
LP2
4.5P1
5P0.5
14.2P1
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E LXG AAA VS N AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 390MF:391,3300MF:332)
Dummy terminal code
Terminal code (VS, LI)
Voltage code (ex. 10V:100,100V:101)
Series code
Category
Please refer to "A guide to global code (snap-in type)"
?RATED RIPPLE CURRENT MULTIPLIERS
@Frequency Multipliers
Frequency (Hz) 50
120 300
1k
10k 50k
10 to 50Vdc
0.95 1.00 1.03 1.05 1.08 1.08
63 to 100Vdc 0.92 1.00 1.07 1.13 1.19 1.20
(1/3)
CAT. No. E1001E