|
ELBK250ELL422AL20S Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS | |||
|
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
For airbag module, 105â
LBKSeries
ã»Downsizing of LBG series.
ã»For airbag application and power supply application
ã»High capacitance, low ESR and good low temperature behavior
ã»Endurance with ripple current : 5,000 hours at 105â
ã»Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
ã»RoHS Compliant
ã»AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
LBK
Downsized
LBG P226
âSPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanÐ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Characteristics
-55 to +105â
25 & 35Vdc
2,500 to 14,000µF
(at 20â, 120Hz)
0 to +30% (A)
(at 20â, 120Hz)
I=0.01CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20â after 2 minutes)
Rated voltage (Vdc)
25V 35V
tanδ (Max.)
0.20 0.16
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
(at 20â, 120Hz)
Rated voltage (Vdc)
25V 35V
Z(-55â)/Z(+20â)
33
(at 120Hz)
The following speciï¬cations shall be satisï¬ed when the capacitors are restored to 20â after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105â.
Capacitance change
â¦Â±20% of the initial value
D.F. (tanδ)
â¦200% of the initial speciï¬ed value
Leakage current
â¦The initial speciï¬ed value
The following speciï¬cations shall be satisï¬ed when the capacitors are restored to 20â after exposing them for 1,000 hours at 105â without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
â¦Â±20% of the initial value
D.F. (tanδ)
â¦200% of the initial speciï¬ed value
Leakage current
â¦The initial speciï¬ed value
âDIMENSIONS [mm]
âTerminal Code : E
Sleeve (PET : Dark blue)
Vent
L'
15min.
4min.
Gas escape end seal
ÏD 16 18
Ïd 0.8 0.8
F 7.5 7.5
ÏD' ÏD+0.5max.
L' L+1.5max.
âPART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E LBK AAA E AA AAA A AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 3,500µF:352, 14,000µF:143)
Lead forming·taping code
Terminal code
Voltage code (ex. 25V:250, 35V:350)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
224
CAT. No. E1001Q
|
▷ |