EKZM6R3ESS221ME11D Datasheet, PDF (1/3 Pages) United Chemi-Con, Inc. – Aluminum Electrolytic Capacitor

Engineering Bulletin Tentative
No.763C / Jul.2005
Aluminum Electrolytic Capacitor
@Long-Life version of KZH series
@Endurance : 105C 6,000 to 10,000 hours with ripple current
@Newly innovative electrolyte is employed to minimize ESR
@Rated voltage range : 6.3 to 50V, Nominal capacitance range : 27 to 10,000MF
@Non solvent-proof
@RoHS Compliant
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +105C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
Endurance
Shelf Life
6.3 to 50Vdc
P20% (M)
(at 20C, 120Hz)
I=0.01CV
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 2 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V
tanE (Max.)
0.22 0.19 0.16 0.14 0.12 0.10
When nominal capacitance exceeds 1,000MF, add 0.02 to the value above for each 1,000MF increase.
(at 20C, 120Hz)
Z(-25C)/Z(+20C)
2 max.
Z(-40C)/Z(+20C)
3 max.
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for the specified period of time at 105C.
Time
F5 & F6.3 : 6,000hours F8 & F10B12.5 : 8,000hours F10B16 to F18 : 10,000hours
Capacitance change [P25% of the initial value (6.3, 10V : [P30%)
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 105C
without voltage applied.
Capacitance change [P25% of the initial value (6.3, 10V : [P30%)
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve(Brown : PET)
L'
Vent
(Except F5 & F6.3)
15min.
4min.
(F5 to F10)
(F12.5 to F18)
Gas escape end seal
fD 5 6.3 8 10 12.5 16 18
fd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
fD'
FD+0.5max.
L'
L+1.5max.
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KZM AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 100MF:101, 1,000MF:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 10V:100)
Series code
Category
?RATED RIPPLE CURRENT MULTIPLIERS
@Frequency Multipliers
Frequency (Hz)
Capacitance (mF)
27 to 180
120
0.40
1k
0.75
10k
0.90
100k
1.00
220 to 560
0.50 0.85 0.94 1.00
680 to 1,800
0.60 0.87 0.95 1.00
2,200 to 3,900
0.75 0.90 0.95 1.00
4,700 to 10,000
0.85 0.95 0.98 1.00
Note : The endurance of capacitors is shorted with internal heating produced by ripple currents at the rate of halving the lifetime with every 5C rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Specifications in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1318
1