EKZH6R3ESS221ME11D Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, 105C
@Ultra Low impedance for Personal Computer and Storage Equipment
@Endurance with ripple current: 105C 5000 to 6000 hours
@Non solvent-proof type
@Pb-free design
KZH
Lower Z
KZE
lower Z
KY
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +105C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
6.3 to 35Vdc
P20% (M)
(at 20C, 120Hz)
I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 2 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V
tanE (Max.)
0.22 0.19 0.16 0.14 0.12
When nominal capacitance exceeds 1000MF, add 0.02 to the value above for each 1000MF increase.
(at 20C, 120Hz)
Z (-25C) / Z (+20C) 2max.
Z (-40C) / Z (+20C) 3max.
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for the specified period of time at 105C.
Time
F5 & F6.3 : 5000hours F8 to F16 : 6000hours
Capacitance change [P25% of the initial value (6.3, 10V : [P30%)
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 105C
without voltage applied.
Capacitance change [P25% of the initial value (6.3, 10V : [P30%)
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET)
Vent
L'
(Except F5 & F6.3)
15min
4min
(F5 to F10)
(F12.5 to F18)
Gas escaped end seal
fD 5
fd 0.5
F 2.0
fD'
L'
6.3 8 10 12.5 16
0.5 0.6 0.6 0.6 0.8
2.5 3.5 5.0 5.0 7.5
FD+0.5max.
L+1.5max.
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KZH AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47MF:470,100MF:101,1000MF:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3,35V:350)
Series code
Category
Please refer to "A guide to global code (radial lead type)"
(1/2)
CAT. No. E1001E