EKY-500ELL221MJ16S Datasheet, PDF (1/3 Pages) United Chemi-Con, Inc. – Low impedance, 105℃

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, 105ˆ
,:4FSJFT
˔Newly innovative electrolyte is employed to minimize ESR
˔Endurance with ripple current : 4,000 to 10,000 hours at 105ˆ
˔Non solvent resistant type
˔RoHS Compliant
KZH
Lower Z
KZE
Lower Z
KY
˗SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +105ˆ
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanЎ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
6.3 to 100Vdc
ʶ20% (M)
(at 20ˆ, 120Hz)
I=0.01CV or 3ŸA, whichever is greater.
Where, I : Max. leakage current (ŸA), C : Nominal capacitance (ŸF), V : Rated voltage (V)
(at 20ˆ after 2 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V
t a nЎ (Max.)
0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08
When nominal capacitance exceeds 1,000ŸF, add 0.02 to the value above for each 1,000ŸF increase.
(at 20ˆ, 120Hz)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V
Z(-25ˆ)/Z(+20ˆ)
4
3
2
2
2
2
2
2
2
Z(-40ˆ)/Z(+20ˆ)
8
6
4
3
3
3
3
3
3
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20ˆ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105ˆ.
Time
6.3 to 10Vdc П5 & 6.3 : 4,000hours П8 & 10 : 6,000hours П12.5 to 18 : 8,000hours
16 to 100Vdc П5 & 6.3 : 5,000hours П8 & 10 : 7,000hours П12.5 to 18 : 10,000hours
Capacitance change ʽʶ25% of the initial value
D.F. (tanЎ)
ʽ200% of the initial specified value
Leakage current
ʽThe initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20ˆ after exposing them for 500 hours at 105ˆ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ʽʶ25% of the initial value
D.F. (tanЎ)
ʽ200% of the initial specified value
Leakage current
ʽThe initial specified value
˗DIMENSIONS [mm]
˔Terminal Code : E
Sleeve (PET : Brown)
Vent
L'
(ExceptП5 &П6.3)
15min.
4min.
(П5 to П10)
(П12.5 to П18)
Gas escape end seal
˗PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KY-
E
M
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 1.0ŸF:1R0,10ŸF:100,100ŸF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3,50V:500)
Series code
Category
Please refer to "Product code guide (radial lead type)"
ПD 5 6.3 8 10 12.5 16 18
Пd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
ПD'
ПD+0.5max.
L'
L+1.5max.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/3)
CAT. No. E1001M