EKXG201E Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – 160 to 450Vdc long life, 105℃

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
160 to 450Vdc long life, 105℃
KXGSeries
・For electronic ballast circuits and other long life applications
・Endurance with ripple current : 8,000 to 10,000 hours at 105℃
・Non solvent resistant type
・RoHS Compliant
KXJ P166
Downsized
KXG
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +105℃ (160 to 400Vdc) -25 to+105℃ (450Vdc)}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
160 to 450Vdc
±20% (M)
(at 20℃, 120Hz)
After 1 minute
After 5 minutes
CV≦1,000
CV>1,000
I=0.1CV+40
I=0.04CV+100
I=0.03CV+15
I=0.02CV+25
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃)
Rated voltage (Vdc)
160 to 250V 350 to 450V
tanδ (Max.)
0.20
0.24
(at 20℃, 120Hz)
Rated voltage (Vdc)
160 to 250V 350 & 400V 450V
Z(-25℃)/Z(+20℃)
3
5
6
Z(-40℃)/Z(+20℃)
6
6
-
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours (8,000 hours for φ10) at 105℃.
Capacitance change ≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦500% of the initial specified value
◆DIMENSIONS [mm]
●Terminal Code : E
Sleeve (PET : Brown)
Vent
L'
15min.
4min.
(φ10)
(φ12.5 toφ18)
Gas escape end seal
φD 10 12.5 16 18
φd 0.6 0.6 0.8 0.8
F 5.0 5.0 7.5 7.5
φD'
φD+0.5max.
L'
L+1.5max.
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KXG AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6.8µF:6R8,10µF:100,100µF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 160V:161,450V:451)
Series code
Category
Please refer to "Product code guide (radial lead type)"
◆RATED RIPPLE CURRENT MULTIPLIERS
●Frequency Multipliers
Frequency (Hz)
Capacitance (µF)
120
6.8 to 82
1.00
100 to 330
1.00
1k
1.75
1.67
10k
2.25
2.05
100k
2.50
2.25
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
170
CAT. No. E1001N