EKRG6R3ESS470ME07D Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low profile, 105C
@Low profile : F4B7mm to F18B25mm
@Endurance : 105C 1000 hours
@Solvent-proof type (see PRECAUTIONS AND GUIDELINES)
@Pb-free design
KRG
downsized
downsized
low profile
KMA KME
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-55 to +105C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
6.3 to 50Vdc
P20% (M)
(at 20C, 120Hz)
I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 2 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V
tanE (Max.)
0.28 0.24 0.20 0.16 0.14 0.12
When nominal capacitance exceeds 1000MF, add 0.03 to the value above for each 1000MF increase.
(at 20C, 120Hz)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V
Z(-25C)/Z(+20C)
5
4
3
2
2
2
Z(-40C)/Z(+20C)
10 8
6
4
3
3
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours
at 105C.
Rated voltage
6.3 to 16Vdc
25 to 50Vdc
Capacitance change [P25% of the initial value
[P20% of the initial value
D.F. (tanE)
[200% of the initial specified value [200% of the initial specified value
Leakage current
[The initial specified value
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 105C
without voltage applied.
Rated voltage
6.3 to 16Vdc
25 to 50Vdc
Capacitance change [P25% of the initial value
[P20% of the initial value
D.F. (tanE)
[200% of the initial specified value [200% of the initial specified value
Leakage current
[The initial specified value
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET)
L'
15min.
4min.
Vent
(F10 and larger)
fD
4 5 6.3 8 10 & 12.5 16 & 18
7L 0.45 0.45 0.45 -
-
-
fd _{]9L - 0.5 0.5 0.6}
0.6
0.8
F
1.5 2.0 2.5 3.5
5.0
7.5
fD'
FD+0.5max.
L'
L+1.5max. (7L : L+1.0max.)
or
(F4 to F10)
Gas escape end seal
(F12.5 to F18)
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KRG AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 0.1MF:R10,10MF:100,1000MF:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3,35V:350,50V:500)
Series code
Category
Please refer to "A guide to global code (radial lead type)"
(1/2)
CAT. No. E1001E