EKRG6R3E Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – Low profile, 105℃

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low profile, 105℃
KRGSeries
・Low profile :φ4×7mm toφ18×25mm
・Endurance : 1,000 hours at 105℃
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
KRG
Downsized
Downsized
Low profile
KMA KMG
P113 P129
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-55 to +105℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
6.3 to 50Vdc
±20% (M)
(at 20℃, 120Hz)
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃ after 2 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V
tanδ(Max.)
0.28 0.24 0.20 0.16 0.14 0.12
When nominal capacitance exceeds 1,000µF, add 0.03 to the value above for each 1,000µF increase.
(at 20℃, 120Hz)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V
Z(-25℃)/Z(+20℃)
54
3
2
2
2
Z(-40℃)/Z(+20℃)
10 8
6
4
3
3
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 1,000 hours
at 105℃.
Rated voltage
6.3 to 16Vdc
25 to 50Vdc
Capacitance change ≦±25% of the initial value
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value ≦200% of the initial specified value
Leakage current
≦The initial specified value
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Rated voltage
6.3 to 16Vdc
25 to 50Vdc
Capacitance change ≦±25% of the initial value
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value ≦200% of the initial specified value
Leakage current
≦The initial specified value
≦The initial specified value
◆DIMENSIONS [mm]
●Terminal Code : E
Sleeve (PET : Brown)
L'
15min.
4min.
Vent
(φ10 and larger)
φD
4 5 6.3 8 10 & 12.5 16 & 18
φd
7L 0.45 0.45 0.45
≧9L - 0.5 0.5
-
0.6
-
0.6
-
0.8
F
1.5 2.0 2.5 3.5
5.0
7.5
φD '
φD+0.5max.
L'
L+1.5max. (7L : L+1.0max.)
or
(φ4 toφ10)
Gas escape end seal
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KRG AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 10µF:100, 1,000µF:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 35V:350, 50V:500)
Series code
Category
Please refer to "Product code guide (radial lead type)"
(φ12.5 toφ18)
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
117
CAT. No. E1001N